USB open host controller problem- help needed!

  • Thread starter Thread starter the furry goldfish
  • Start date Start date
T

the furry goldfish

was wondering if anyone can help me with a problem- my
home computer cannot use USB devices currently- when i
open device mangager, it informs me that the AMD 756 PCI
to Open host drivers are either missing or corrupted. i
have downloaded and installed Peripheral Controller Bus
drivers from AMD's site, in the hope that it may help. it
hasnt.

if you can help me at all, please email me at:

(e-mail address removed)

thanks
 
Hi.

I'm using an AMD 750 with USB ports, I have mouse, printer, camera and
scanner(not all at once) running through my USB ports... I had to go to my
motherboard manufacturer's site for the USB drivers.

but try installing new hardware first, and select choose from list, then
install the USB hub drivers that windows provides. You'll need to fully
shut-down and re-start... and while you're machine is in that mode during
re-boot, press the <del> key and look through your BIOS pages, to see
whether or not your USB ports have been enabled in there.

You can find out who your motherboard manufacturer is through the system
information program.

Hope this helps

Sam.
 
Back
Top