usb/ide > 200gig HD > Win98SE, how to scandisk??

  • Thread starter Thread starter mike
  • Start date Start date
M

mike

I have a maxtor 200gig hard drive and a no-name usb2/ide converter
on my win98se system to use for archive storage. The only
sw that came with the converter are the usb driver files.

I formatted it as one big partition and loaded a bunch of stuff on it.
Seems to be working fine.
I tried to scandisk it. I get an error message that I don't
have enough memory to run scandisk.
I tried NDD from Norton 4.0. It tries to fix up a bunch of
errors every time it runs. Surface test detects no problems.
But I get a bunch of fixups every time I run NDD. Takes forever
if there's a lot of stuff on the drive. Pretty quick on an empty
drive.

I thought the USB/IDE converter took care of all the math issues
surrounding big drives on 98se???

So, what do I do to allow me to scandisk (or equivalent utility)
this external usb2/ide hard drive with win98se?
Thanks, mike

--
Wanted, Serial cable for Dell Axim X5 PDA.
Return address is VALID but some sites block emails
with links. Delete this sig when replying.
FS 500MHz Tek DSOscilloscope TDS540 Make Offer
Bunch of stuff For Sale and Wanted at the link below.
MAKE THE OBVIOUS CHANGES TO THE LINK
ht<removethis>tp://www.geocities.com/SiliconValley/Monitor/4710/
 
mike said:
I have a maxtor 200gig hard drive and a no-name usb2/ide converter on my
win98se system to use for archive storage. The only sw that came with the
converter are the usb driver files.
Click to expand...
I formatted it as one big partition and loaded a bunch of stuff on it.
Seems to be working fine.
I tried to scandisk it. I get an error message that I don't have enough
memory to run scandisk.
Click to expand...

That's normal because win98se doesnt
have support for drives over 127G
http://www.48bitlba.com/win98.htm
I tried NDD from Norton 4.0.
Click to expand...

That's dangerous since its long before 48 bit LBA.
It tries to fix up a bunch of errors every time it runs. Surface test detects
no problems.
But I get a bunch of fixups every time I run NDD. Takes forever if there's a
lot of stuff on the drive. Pretty quick on an empty drive.
Click to expand...
I thought the USB/IDE converter took care of all the math issues surrounding
big drives on 98se???
Click to expand...

Not entirely as you have found.
So, what do I do to allow me to scandisk (or equivalent utility)
this external usb2/ide hard drive with win98se?
Click to expand...

The latest NDD might support it.
 
Back
Top