USB Generic Hub

  • Thread starter Thread starter Glenn
  • Start date Start date
G

Glenn

I have a USB 2.0 Generic Hub that Vista calls an "Unrecognized Device." I
should not need a driver for this and Windows Vista agrees that a driver is
not needed. What do I do?

When I plug in a USB 1.0 Generic Hub into the same USB port it works like a
champ.

I have lurked for several days and have seen messages about lots of USB
problems, but no answer for my problem.

Reply to (e-mail address removed) if you don't want to reply to the group.
 
Have you checked your BIOS settings to insure that the USB options are set
to allow USB 2 operation?

Bob S.
 
I have updated my BIOS. The system already recognizes all my other USB 2.0
devices (2 cards, one came with the PC the other I added myself.

Glenn
\
 
See if you can find out who made that hub that isn't working and ask them.
You've done about all you can do to verify it's not your system and that it
is the hub device.

Bob S.
 
No luck. The hub says USB 2.0 and "made in China," that's all. No
manufacturer or any other name. I guess it will just be worthless to me.

Glenn
 
Back
Top