USB capture driver installation failure

  • Thread starter Thread starter Izico Chang
  • Start date Start date
I

Izico Chang

the Grand AV USB 2.0 capture install well on Windows
XP,but on Windows XP Embedded the installation fail at
last with the message: the required section was not found
in the INF.
Anybody has advice on this?
It uses the Crescentec DC1100 chip,and the drivers from
both www.sohya.com.tw and www.grand.com.tw don't work.
 
Hi,
I Have Exactly the same problem but with one of the
Intel Motherboards (GLLY) with a embedded Video Card.
Same Message at the end of the setup process. This board
have Audio, ENET also embedded and no ploblem with that.
Using XP Profesional in the same Motherboard works fine.

Somebody can Help me?

Thanks
 
You may need to do a custom import instead of automatic import of this inf
because a required section isn't being referenced correctly in the INF. Here
are some tip article for some driver componentization issues, follow the
instructions in the second one for doing a "custom import" when importing
via CD, though the section you need to specify may be different depending on
your inf. Lastly, try searching the GOOGLE archives of this newsgroup, your
issues have been discussed and answered before..

http://www.microsoft.com/windows/embedded/community/tips/xp/thirdparty.asp
http://www.microsoft.com/windows/embedded/community/tips/xp/drivererrors.asp
--
Andy

This posting is provided "AS IS" with no warranties, and confers no
rights.
=====================================================
 
Back
Top