A
anil.verve
Hi all,
I have an operating system (BELENIX - a open solaris distribution)
installed on a Sony Microvault 1gb pen drive. It has grub installed on
it.
My PC config :
P4 2.66, 512 ram, 160 SATA Hdd, DVD R/W . Asrock 775i45GV motherboard.
I unable to boot the USB on my PC. The stage one loads and i get a grub
command prompt. the bootable devices visible there are only hd1 and
fd1.
I can successfully boot stage 2 followed by the OS on my friends PC and
laptop. The devices that i can see there from grub are hd0, hd1 and
fd0.
Will updating the firmware (flashing the BIOS) from
http://www.asrock.com/support/download.asp?Model=775i45GV ? What are
the risks. My current version of the BIOS setup is AMIBios - 08.00.11
Build : 05/03/05 ID : 915-MS.
I have an operating system (BELENIX - a open solaris distribution)
installed on a Sony Microvault 1gb pen drive. It has grub installed on
it.
My PC config :
P4 2.66, 512 ram, 160 SATA Hdd, DVD R/W . Asrock 775i45GV motherboard.
I unable to boot the USB on my PC. The stage one loads and i get a grub
command prompt. the bootable devices visible there are only hd1 and
fd1.
I can successfully boot stage 2 followed by the OS on my friends PC and
laptop. The devices that i can see there from grub are hd0, hd1 and
fd0.
Will updating the firmware (flashing the BIOS) from
http://www.asrock.com/support/download.asp?Model=775i45GV ? What are
the risks. My current version of the BIOS setup is AMIBios - 08.00.11
Build : 05/03/05 ID : 915-MS.