G
Guest
Dear All,
I have here in My Company, 2 Sepearate Locations, the First one is Head
Office , the second one is the Private office .
The head office have one single Network with this Range of IP-Address (
70.0.0.X / 255.255.255.0 ) .
We have Wireless -Point-To-Point Between the 2 locations .
The Privare office have also one single Network with the same range of
IP-Address in the Head office which is ( 70.0.0.X / 255.255.255.0 ).
All of them is under Workgroup, and no domains at all .
--------------------------------------------------------------------------------------------
what we need , is to create domain and to provide users with the
authentication from the domain by using user name & Password.
-----------------------------
My question is here, i am really get confused, what should i follow :-
1- Should i follow Single Site with Multiple Subnets inside this Single
side, and each side will represent the location . ?
Or
2- should i follw Multiple Site with one subnet at least in each site, and
each site will represent the location it self ?
i really get confused.
as i know the site is used for the Replication , so i want to simple the
replication it self.
-----------------------------------------------------------------------------------------------
3- if i follow the First model which is ( Single site with Multiple Subets &
each subnet will represnt Location ) , i am get confused because i will have
2 subnets between them , so i have first of all is enable the Routing between
them and to connect them by using the router, because the first location will
be 70.0.1.X /24
and the second location will be 70.0.2.X /24.
So, when i create the first domain Controller with the default Site,
How to make the second site & what is the steps which i have to follow :-\
Create site & then Create Subnet in-side this side ?
Or, Create Subnet & then Put the Site in this Subnet ?
Please update me .
I have here in My Company, 2 Sepearate Locations, the First one is Head
Office , the second one is the Private office .
The head office have one single Network with this Range of IP-Address (
70.0.0.X / 255.255.255.0 ) .
We have Wireless -Point-To-Point Between the 2 locations .
The Privare office have also one single Network with the same range of
IP-Address in the Head office which is ( 70.0.0.X / 255.255.255.0 ).
All of them is under Workgroup, and no domains at all .
--------------------------------------------------------------------------------------------
what we need , is to create domain and to provide users with the
authentication from the domain by using user name & Password.
-----------------------------
My question is here, i am really get confused, what should i follow :-
1- Should i follow Single Site with Multiple Subnets inside this Single
side, and each side will represent the location . ?
Or
2- should i follw Multiple Site with one subnet at least in each site, and
each site will represent the location it self ?
i really get confused.
as i know the site is used for the Replication , so i want to simple the
replication it self.
-----------------------------------------------------------------------------------------------
3- if i follow the First model which is ( Single site with Multiple Subets &
each subnet will represnt Location ) , i am get confused because i will have
2 subnets between them , so i have first of all is enable the Routing between
them and to connect them by using the router, because the first location will
be 70.0.1.X /24
and the second location will be 70.0.2.X /24.
So, when i create the first domain Controller with the default Site,
How to make the second site & what is the steps which i have to follow :-\
Create site & then Create Subnet in-side this side ?
Or, Create Subnet & then Put the Site in this Subnet ?
Please update me .