Upgrade to Vista - Intel ATA drivers problem

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

My Intel board (D845BG) is no longer supported and the primary and secondary
channel drivers are not compatible with Vista. I can't believe a simple
driver issue would prevent me from installing Vista. Does anyone know of a
work around? Maybe a generic driver that would work? I am using IDE drives.
This should be a no brainer.

Thanks.

Pat
 
My Intel board (D845BG) is no longer supported and the primary and secondary
channel drivers are not compatible with Vista. I can't believe a simple
driver issue would prevent me from installing Vista. Does anyone know of a
work around? Maybe a generic driver that would work? I am using IDE drives.
This should be a no brainer.

Thanks.

Pat
Click to expand...

Where message do you get from the Vista Upgrade Advisor?
The first IDE controller issue I've read, usually SATA.

Have you checked the Intel web site for new drivers?

One fix requiring you dig a little deep in your pocket but cheaper
they buying a new MB is to get an IDE controller card that plugs into
your MB. Just be sure IT is Vista capable.

Something along the lines of this:

http://www.superwarehouse.com/Siig_UltraATA_100_Storage_Controller/SC-PE4A12/p/117469

I just picked the first that popped up in a Google search. You also
need to match to your MB's slots but SIIG is a good brand check out
THEIR web site directly.
 
Vista runs a compatability test and then tells me the drivers must be
upgraded first. I am not allowed to continue with the installation.
 
The upgrade advisor (on the Vista disk) says I must update the drivers before
I can continue with the installation. The downloadable adviser from Microsoft
only tells me the drivers are not in their database and offers no further
info.

There are no newer drivers on tyhe Intel site and they off no support for
this board anymore.

I hadn't thought of the controller card and i will, though at this point I
am not sure i am willing to invest further just to have Vista when the
machine works perfectly fine for my needs.

Thanks.
 
Do you have the latest BIOS for your MOBO?

patruns said:
Vista runs a compatability test and then tells me the drivers must be
upgraded first. I am not allowed to continue with the installation.
Click to expand...
 
It appears that since your MOBO is 5 years old that there are no Vista BIOS
or driver updates of any kind availble for it.
 
On Sun, 11 Mar 2007 14:47:00 -0700, patruns
My Intel board (D845BG) is no longer supported and the primary and secondary
channel drivers are not compatible with Vista. I can't believe a simple
driver issue would prevent me from installing Vista. Does anyone know of a
work around? Maybe a generic driver that would work? I am using IDE drives.
This should be a no brainer.
Click to expand...

Are you doing a clean install, or an over-old upgrade?

If doing an over-old upgrade, then Vista may be confronted with
"special" drivers (or nebulous driver-like code such as the Intel
Application Accelerator) that are XP-specific.

So I'd start by uninstalling anything like that, before doing the
Vista install (do the "restart Windows" thing too, so that the
uninstall is properly concluded).


--------------- ---- --- -- - - - -
Click to expand...
Saws are too hard to use.
Be easier to use!
 
Hmmm....

I am doing an upgrade, not a clean install. I already removed the drivers
for the channels and XP seems to run just fine without them, though it
continues to want to install new hardware on every boot. That leads me to
believe it really doesn't need them.

I do have the accelerator installed. are you saying if I remove the drivers
for the channels and the accelerator it may work?
 
I uninstalled the accelerator and I was able to install Vista.... albeit a 3+
hour upgrade with minor tinkering still needed.

Thanks so much for the input!

Microsoft, are you noting this?
 
On Sun, 18 Mar 2007 14:49:13 -0700, patruns
I do have the accelerator installed. are you saying if I remove the drivers
for the channels and the accelerator it may work?
Click to expand...

I'd start (or rather, would have started) with uninstalling the
Application Accelerator. Dunno how clean that will be after Vista's
installed over XP; best done before installing Vista.

Application Accelerator's exactly the kind of "is it an app? is it a
driver?" thing that's likely to screw up. If it installs via a
Setup.exe and isn't bound to a device via an .inf, it may well be
missed when it should have been stripped out.

The same problem pattern can arise with other "value-add" bundleware
that's hardware-specific enough to cause trouble, yet is not actually
a "driver" as such - e.g. some CD writing software, the extra settings
tabs added to graphics dialogs that are card-specific, etc.


--------------- ---- --- -- - - - -
Click to expand...
Saws are too hard to use.
Be easier to use!
 
Back
Top