undo starting access with a form

  • Thread starter Thread starter Mike LaPorte
  • Start date Start date
M

Mike LaPorte

All,

I messed up, I read the instructions but tied security too
tight before I was ready to deliver my application. I have
a very basic db that I wanted to start entry form for
others. I was testing this and locked it down too far and
now can't get back to the design pages to fix anything.

I've searched on the KB and here but havent found anything
with the searches I've used.

Any ideas? Please email me at the above email.

thanks!
 
Ok,

What steps have you taken to secure it?

Unfortunately some of the security invoking steps can be irreversible...
 
All,

I messed up, I read the instructions but tied security too
tight before I was ready to deliver my application. I have
a very basic db that I wanted to start entry form for
others. I was testing this and locked it down too far and
now can't get back to the design pages to fix anything.

I've searched on the KB and here but havent found anything
with the searches I've used.
Click to expand...

Have you tried just holding down the SHIFT key while you open the
database to bypass the startup code?

Or have you disabled the Shift bypass? If so, even that protection can
be cleared using some code from a different database.

Or... have you implemented Access workgroup security and left no
provision for administrative user logons? If so... you've painted
yourself into a corner!
Any ideas? Please email me at the above email.
Click to expand...

Done... but be aware that this is considered an impolite request. The
volunteers here post on the newsgroups as a public service; private
EMail support is usually reserved for paying customers.
 
Back
Top