UNC Path not found on servers!

  • Thread starter Thread starter Saeed pazoki
  • Start date Start date
S

Saeed pazoki

Hi,
we are having 2 mixed mode domain controllers in the same domain with one
having two Lan cards set for 2 different subnets one connected to the
internet and the other one for local use. all internal computers are set for
static IP addresses and configuration. the problem is that from the both
servers we can not reach any of the computers through UNC path. we can ping
them though. even the the servers can not reach each other through their UNC
path!?
when we go to any of the stations and try usuing UNC path to access another
station there is no problem but still not successful if we try accessing one
of the domain controllers!?
any help?

thanks is advance,
Saeed
 
what do you get if using net view \\servername command from client?

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
from a client trying to access \\servername I get "The network path was not
found" but I know that on "servername" I have a share named "mayshare" then
when I try \\servername\myshare it works!
I have no problem accessing other clients on the network with the UNC path.

thanks
saeed
 
Back
Top