Unattended install

  • Thread starter Thread starter billykaka
  • Start date Start date
B

billykaka

Hi
I need to install about 150 servers 2 adapters each running w2003 std
srvr with RRAS. These need to be be configured in a LAN routing mode
with input packet filters assigned to certain adapters.
I have figured out how to create the packet filters at the command line
using netsh.
What I need to know is how to do an unattended install of RRAS as a LAN
Routing setup when the OS is already installed.
I have been trying to readup on sysocmgr and have also seen samples of
unattended.txt files with RRAS in it but there are no clues provided
about which line sets up which configuration in these.
I have even used the netsh dump command to try and figure out what the
RAS configuration for the unattend file might be like but no luck.

doing a netsh exec of the dump file results in an error on which there
is a microsoft q article which says that rras needs to be done through
an unattended setup.
I need to know how I can do an unattended setup for RRAS with the LAN
Router option.
PLEASE HELP

Billy
 
You are using W2k3 correct ?
If so, you should be able to restore the dump file using Netsh.
What is your exact error? Can you post the article you referred to.
 
Back
Top