unable to update web page on host

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Using FP2003 has caused me problems. Used to update host at will. Now, can
log on, but several pages are never updated.
For instance, my page warranty.htm was marked to publish, but will not
overwrite the existing page.
 
Are publishing the entire site using Change Pages only or individual pages? Try doing a complete
publish, then a change page only publish.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WebMaster Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================
 
When you published, where you prompted to merge the navigation structure and you selected yes? If so
you need to delete the site off the live/remote server with FP and then do another publish with
change page only selected.

Whenever prompted to merge navigation, always select replace.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WebMaster Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================
 
I am not seeing any problem with your navigation structure.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WebMaster Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================
 
Thanks for looking.

Problem is that I have 13 buttons on the published site on the left side,
and on the bottom, and only 7 on my master on my hard drive.

This is driving me nuts...
Jim
 
Ok, then open your live/remote site in FP and check/repair your navigation structure.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WebMaster Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================
 
solved it by following your directions to open remote and check/repair, by
deleting redundancies.
Thanks,
Jim
 
My problem has similar symptoms. Using FrontPage2003 I have been updating a
site for years with no problems. I had not updated it for 11 months. Now when
I try, I find that I can upload new pages, but cannot modify existing pages.
Frontpage indicates that the upload was successful and the date of the remote
file is updated, but its content is unchanged. I am baffled. What can I do?
 
What happens when you clear out your browser temporary internet files?

--
===
Tom [Pepper] Willett
Microsoft MVP - FrontPage
"You're a daisy if you do!"
---
FrontPage Support:
http://www.frontpagemvps.com/
===
: My problem has similar symptoms. Using FrontPage2003 I have been updating
a
: site for years with no problems. I had not updated it for 11 months. Now
when
: I try, I find that I can upload new pages, but cannot modify existing
pages.
: Frontpage indicates that the upload was successful and the date of the
remote
: file is updated, but its content is unchanged. I am baffled. What can I
do?
: --
: moontube
:
:
: "Thomas A. Rowe" wrote:
:
: > Ok, then open your live/remote site in FP and check/repair your
navigation structure.
: >
: > --
: > ==============================================
: > Thomas A. Rowe (Microsoft MVP - FrontPage)
: > WebMaster Resources(tm)
: >
: > FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > ==============================================
: > If you feel your current issue is a results of installing
: > a Service Pack or security update, please contact
: > Microsoft Product Support Services:
: > http://support.microsoft.com
: > If the problem can be shown to have been caused by a
: > security update, then there is usually no charge for the call.
: > ==============================================
: >
: > : > > Thanks for looking.
: > >
: > > Problem is that I have 13 buttons on the published site on the left
side,
: > > and on the bottom, and only 7 on my master on my hard drive.
: > >
: > > This is driving me nuts...
: > > Jim
: > >
: > >
: > > "Thomas A. Rowe" wrote:
: > >
: > >> I am not seeing any problem with your navigation structure.
: > >>
: > >> --
: > >> ==============================================
: > >> Thomas A. Rowe (Microsoft MVP - FrontPage)
: > >> WebMaster Resources(tm)
: > >>
: > >> FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > >> ==============================================
: > >> If you feel your current issue is a results of installing
: > >> a Service Pack or security update, please contact
: > >> Microsoft Product Support Services:
: > >> http://support.microsoft.com
: > >> If the problem can be shown to have been caused by a
: > >> security update, then there is usually no charge for the call.
: > >> ==============================================
: > >>
: > >> : > >> >I did a complete publish and now have a real mess of a menu on the
left side
: > >> > at www.granitefoundationrepair.com
: > >> >
: > >> > Jim
: > >> >
: > >> > "Thomas A. Rowe" wrote:
: > >> >
: > >> >> Are publishing the entire site using Change Pages only or
individual pages? Try doing a
: > >> >> complete
: > >> >> publish, then a change page only publish.
: > >> >>
: > >> >> --
: > >> >> ==============================================
: > >> >> Thomas A. Rowe (Microsoft MVP - FrontPage)
: > >> >> WebMaster Resources(tm)
: > >> >>
: > >> >> FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > >> >> ==============================================
: > >> >> If you feel your current issue is a results of installing
: > >> >> a Service Pack or security update, please contact
: > >> >> Microsoft Product Support Services:
: > >> >> http://support.microsoft.com
: > >> >> If the problem can be shown to have been caused by a
: > >> >> security update, then there is usually no charge for the call.
: > >> >> ==============================================
: > >> >>
: > >> >> : > >> >> > Using FP2003 has caused me problems. Used to update host at
will. Now, can
: > >> >> > log on, but several pages are never updated.
: > >> >> > For instance, my page warranty.htm was marked to publish, but
will not
: > >> >> > overwrite the existing page.
: > >> >>
: > >> >>
: > >> >>
: > >>
: > >>
: > >>
: >
: >
: >
 
Hi Tom,

No help. Clearing the temps did not change the behavior.
--
moontube


Tom [Pepper] Willett said:
What happens when you clear out your browser temporary internet files?

--
===
Tom [Pepper] Willett
Microsoft MVP - FrontPage
"You're a daisy if you do!"
---
FrontPage Support:
http://www.frontpagemvps.com/
===
: My problem has similar symptoms. Using FrontPage2003 I have been updating
a
: site for years with no problems. I had not updated it for 11 months. Now
when
: I try, I find that I can upload new pages, but cannot modify existing
pages.
: Frontpage indicates that the upload was successful and the date of the
remote
: file is updated, but its content is unchanged. I am baffled. What can I
do?
: --
: moontube
:
:
: "Thomas A. Rowe" wrote:
:
: > Ok, then open your live/remote site in FP and check/repair your
navigation structure.
: >
: > --
: > ==============================================
: > Thomas A. Rowe (Microsoft MVP - FrontPage)
: > WebMaster Resources(tm)
: >
: > FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > ==============================================
: > If you feel your current issue is a results of installing
: > a Service Pack or security update, please contact
: > Microsoft Product Support Services:
: > http://support.microsoft.com
: > If the problem can be shown to have been caused by a
: > security update, then there is usually no charge for the call.
: > ==============================================
: >
: > : > > Thanks for looking.
: > >
: > > Problem is that I have 13 buttons on the published site on the left
side,
: > > and on the bottom, and only 7 on my master on my hard drive.
: > >
: > > This is driving me nuts...
: > > Jim
: > >
: > >
: > > "Thomas A. Rowe" wrote:
: > >
: > >> I am not seeing any problem with your navigation structure.
: > >>
: > >> --
: > >> ==============================================
: > >> Thomas A. Rowe (Microsoft MVP - FrontPage)
: > >> WebMaster Resources(tm)
: > >>
: > >> FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > >> ==============================================
: > >> If you feel your current issue is a results of installing
: > >> a Service Pack or security update, please contact
: > >> Microsoft Product Support Services:
: > >> http://support.microsoft.com
: > >> If the problem can be shown to have been caused by a
: > >> security update, then there is usually no charge for the call.
: > >> ==============================================
: > >>
: > >> : > >> >I did a complete publish and now have a real mess of a menu on the
left side
: > >> > at www.granitefoundationrepair.com
: > >> >
: > >> > Jim
: > >> >
: > >> > "Thomas A. Rowe" wrote:
: > >> >
: > >> >> Are publishing the entire site using Change Pages only or
individual pages? Try doing a
: > >> >> complete
: > >> >> publish, then a change page only publish.
: > >> >>
: > >> >> --
: > >> >> ==============================================
: > >> >> Thomas A. Rowe (Microsoft MVP - FrontPage)
: > >> >> WebMaster Resources(tm)
: > >> >>
: > >> >> FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > >> >> ==============================================
: > >> >> If you feel your current issue is a results of installing
: > >> >> a Service Pack or security update, please contact
: > >> >> Microsoft Product Support Services:
: > >> >> http://support.microsoft.com
: > >> >> If the problem can be shown to have been caused by a
: > >> >> security update, then there is usually no charge for the call.
: > >> >> ==============================================
: > >> >>
: > >> >> : > >> >> > Using FP2003 has caused me problems. Used to update host at
will. Now, can
: > >> >> > log on, but several pages are never updated.
: > >> >> > For instance, my page warranty.htm was marked to publish, but
will not
: > >> >> > overwrite the existing page.
: > >> >>
: > >> >>
: > >> >>
: > >>
: > >>
: > >>
: >
: >
: >
Click to expand...
 
Have you tried a full publish, not just changed pages?
Can you post a URL to one of the pages in question, telling us what *should*
be on the page that you recently changed, but isn't?
--
===
Tom [Pepper] Willett
Microsoft MVP - FrontPage
"You're a daisy if you do!"
---
FrontPage Support:
http://www.frontpagemvps.com/
===
: Hi Tom,
:
: No help. Clearing the temps did not change the behavior.
: --
: moontube
:
:
: "Tom [Pepper] Willett" wrote:
:
: > What happens when you clear out your browser temporary internet files?
: >
: > --
: > ===
: > Tom [Pepper] Willett
: > Microsoft MVP - FrontPage
: > "You're a daisy if you do!"
: > ---
: > FrontPage Support:
: > http://www.frontpagemvps.com/
: > ===
: > : > : My problem has similar symptoms. Using FrontPage2003 I have been
updating
: > a
: > : site for years with no problems. I had not updated it for 11 months.
Now
: > when
: > : I try, I find that I can upload new pages, but cannot modify existing
: > pages.
: > : Frontpage indicates that the upload was successful and the date of the
: > remote
: > : file is updated, but its content is unchanged. I am baffled. What can
I
: > do?
: > : --
: > : moontube
: > :
: > :
: > : "Thomas A. Rowe" wrote:
: > :
: > : > Ok, then open your live/remote site in FP and check/repair your
: > navigation structure.
: > : >
: > : > --
: > : > ==============================================
: > : > Thomas A. Rowe (Microsoft MVP - FrontPage)
: > : > WebMaster Resources(tm)
: > : >
: > : > FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > : > ==============================================
: > : > If you feel your current issue is a results of installing
: > : > a Service Pack or security update, please contact
: > : > Microsoft Product Support Services:
: > : > http://support.microsoft.com
: > : > If the problem can be shown to have been caused by a
: > : > security update, then there is usually no charge for the call.
: > : > ==============================================
: > : >
: > : > : > : > > Thanks for looking.
: > : > >
: > : > > Problem is that I have 13 buttons on the published site on the
left
: > side,
: > : > > and on the bottom, and only 7 on my master on my hard drive.
: > : > >
: > : > > This is driving me nuts...
: > : > > Jim
: > : > >
: > : > >
: > : > > "Thomas A. Rowe" wrote:
: > : > >
: > : > >> I am not seeing any problem with your navigation structure.
: > : > >>
: > : > >> --
: > : > >> ==============================================
: > : > >> Thomas A. Rowe (Microsoft MVP - FrontPage)
: > : > >> WebMaster Resources(tm)
: > : > >>
: > : > >> FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > : > >> ==============================================
: > : > >> If you feel your current issue is a results of installing
: > : > >> a Service Pack or security update, please contact
: > : > >> Microsoft Product Support Services:
: > : > >> http://support.microsoft.com
: > : > >> If the problem can be shown to have been caused by a
: > : > >> security update, then there is usually no charge for the call.
: > : > >> ==============================================
: > : > >>
: > : > >> : > : > >> >I did a complete publish and now have a real mess of a menu on
the
: > left side
: > : > >> > at www.granitefoundationrepair.com
: > : > >> >
: > : > >> > Jim
: > : > >> >
: > : > >> > "Thomas A. Rowe" wrote:
: > : > >> >
: > : > >> >> Are publishing the entire site using Change Pages only or
: > individual pages? Try doing a
: > : > >> >> complete
: > : > >> >> publish, then a change page only publish.
: > : > >> >>
: > : > >> >> --
: > : > >> >> ==============================================
: > : > >> >> Thomas A. Rowe (Microsoft MVP - FrontPage)
: > : > >> >> WebMaster Resources(tm)
: > : > >> >>
: > : > >> >> FrontPage Resources, WebCircle, MS KB Quick Links, etc.
: > : > >> >> ==============================================
: > : > >> >> If you feel your current issue is a results of installing
: > : > >> >> a Service Pack or security update, please contact
: > : > >> >> Microsoft Product Support Services:
: > : > >> >> http://support.microsoft.com
: > : > >> >> If the problem can be shown to have been caused by a
: > : > >> >> security update, then there is usually no charge for the call.
: > : > >> >> ==============================================
: > : > >> >>
: > : > >> >> : > : > >> >> > Using FP2003 has caused me problems. Used to update host at
: > will. Now, can
: > : > >> >> > log on, but several pages are never updated.
: > : > >> >> > For instance, my page warranty.htm was marked to publish,
but
: > will not
: > : > >> >> > overwrite the existing page.
: > : > >> >>
: > : > >> >>
: > : > >> >>
: > : > >>
: > : > >>
: > : > >>
: > : >
: > : >
: > : >
: >
: >
: >
 
Hi Tom,

Thanks for your suggestion. You are making me feel like I know something
about what I am doing. Yes. I did try a full publish, followed by a change
page only publish. The URL is www.taylortwinpictures.com/default.htm. The top
item, Rob
Wins Best Actor! should have been pushed down to second place when I added a
new item above it. The updated page is actually on the site. I was able to
upload it as default2.htm. However, when I renamed default2.htm to
default.htm, it reverted to the original page.
 
Back
Top