Unable to start BCM

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi,

I have just reinstalled BCM v2 into my Windows 2000 SP4, when I start
Outlook 2003, I received lots of error messages but a common message as
follows:

..Net Framework
An unhandled exception has occured in a component. Access is denined:
"Accessibility"

Keep clicking continue would eventually get rid of all these messages.

I am DESPERATE to recover all my database but without access to BCM, it is
hopeless.

Would someone be able to help me out please?

Thank you.
Eisen
 
Hi Eisen

This error message might occur if there is corruption with .Net Frame Work
..Uninstall all version of .Net Frame Work from add / remove program.Once
this is done do a reinstall of BCM V2 to recreate .Net

Hope this helps
 
Raul,

Uninstalled BCM, .Net Frame and that MSSM SQL stuff to start fresh. It
went well until MsiInstaller reported an error, "SQL Server Desktop Engine -
Setup failed to configure the server. Refer to the server error logs and
setup error logs for more information."

I am not aware of any server needed to be configured. Should I be?

Is it trying to connect to a server somewhere?

I could see that .Net Frame 1.1 had been installed succefully in the Add /
Remove Programs.

I really wonder if BCM v2 is compatible with Outlook 2003 SP1 (11.8010.6360).

Any more clues or suggestions to help me get through this nightmare will be
appreciated.
 
Hi Eisen

Can you browse to the following folder C:\Program Files\Microsoft SQL
Server\MSSQL$MICROSOFTSMLBIZ\Install and check if you have a file called
confgsvr.out .If you have do have the same try opening it on notepad and let
me know what is says ?
 
Right...It says the following.
#################################

Starting Service ...

SQL_Latin1_General_CP1_CI_AS

-m -Q -T4022 -T3659

Connecting to Server ...

driver={sql
server};server=ECTOSHIBA\MICROSOFTSMLBIZ;UID=sa;PWD=;database=master

[Microsoft][ODBC SQL Server Driver]Client unable to establish connection

[Microsoft][ODBC SQL Server Driver]Unable to load communication module.
Driver has not been correctly installed.

#################################

It looks like driver errors, please advise.

Regards,
Eisen
 
Hi Einsen

Can yo Go to start > run > regedit and naviagate to the following keys

H_Key_Local_Machine > Software > ODBC > odbcinst.ini > SQL server exist
--
With Regards

Raul Thomas
Eisen said:
Right...It says the following.
#################################

Starting Service ...

SQL_Latin1_General_CP1_CI_AS

-m -Q -T4022 -T3659

Connecting to Server ...

driver={sql
server};server=ECTOSHIBA\MICROSOFTSMLBIZ;UID=sa;PWD=;database=master

[Microsoft][ODBC SQL Server Driver]Client unable to establish connection

[Microsoft][ODBC SQL Server Driver]Unable to load communication module.
Driver has not been correctly installed.

#################################

It looks like driver errors, please advise.

Regards,
Eisen

Raul said:
Hi Eisen

Can you browse to the following folder C:\Program Files\Microsoft SQL
Server\MSSQL$MICROSOFTSMLBIZ\Install and check if you have a file called
confgsvr.out .If you have do have the same try opening it on notepad and
let
me know what is says ?
Click to expand...
Click to expand...
 
Raul,

SQL Server exisits, it contains the following:

Key Value
APILevel 2
ConnectFunctions YYY
CPTimeout 60
Driver C:/WinNT/System32/SQLSRV32.dll
DriverODBCVer 03.50
FileUsage 0
Setup C:/WinNT/System32/SQLSRV32.dll
SQLLevel 1

I hope these means something to you, because I am absolutely clueless.

Thanks for your patience and guidance,

Regards,
Eisen

Raul said:
Hi Einsen

Can yo Go to start > run > regedit and naviagate to the following keys

H_Key_Local_Machine > Software > ODBC > odbcinst.ini > SQL server exist
--
With Regards

Raul Thomas
Eisen said:
Right...It says the following.
#################################

Starting Service ...

SQL_Latin1_General_CP1_CI_AS

-m -Q -T4022 -T3659

Connecting to Server ...

driver={sql
server};server=ECTOSHIBA\MICROSOFTSMLBIZ;UID=sa;PWD=;database=master

[Microsoft][ODBC SQL Server Driver]Client unable to establish connection

[Microsoft][ODBC SQL Server Driver]Unable to load communication module.
Driver has not been correctly installed.

#################################

It looks like driver errors, please advise.

Regards,
Eisen

Raul said:
Hi Eisen

Can you browse to the following folder C:\Program Files\Microsoft SQL
Server\MSSQL$MICROSOFTSMLBIZ\Install and check if you have a file called
confgsvr.out .If you have do have the same try opening it on notepad and
let
me know what is says ?
--
With Regards

Raul Thomas
Raul,

Uninstalled BCM, .Net Frame and that MSSM SQL stuff to start fresh. It
went well until MsiInstaller reported an error, "SQL Server Desktop
Engine -
Setup failed to configure the server. Refer to the server error logs
and
setup error logs for more information."

I am not aware of any server needed to be configured. Should I be?

Is it trying to connect to a server somewhere?

I could see that .Net Frame 1.1 had been installed succefully in the
Add /
Remove Programs.

I really wonder if BCM v2 is compatible with Outlook 2003 SP1
(11.8010.6360).

Any more clues or suggestions to help me get through this nightmare
will
be
appreciated.


:

Hi Eisen

This error message might occur if there is corruption with .Net Frame
Work
..Uninstall all version of .Net Frame Work from add / remove
program.Once
this is done do a reinstall of BCM V2 to recreate .Net

Hope this helps
--
With Regards

Raul Thomas
Hi,

I have just reinstalled BCM v2 into my Windows 2000 SP4, when I
start
Outlook 2003, I received lots of error messages but a common message
as
follows:

.Net Framework
An unhandled exception has occured in a component. Access is
denined:
"Accessibility"

Keep clicking continue would eventually get rid of all these
messages.

I am DESPERATE to recover all my database but without access to BCM,
it
is
hopeless.

Would someone be able to help me out please?

Thank you.
Eisen
Click to expand...
Click to expand...
Click to expand...
 
Hi Eisen

Can you try the following article
http://support.microsoft.com/kb/840018/en-us
also do note since your running BCM V2 the named instance would be
MSSQL$MICROSOFTSMLBIZ rather than the MSSQL$MICROSOFTBCM instance
mention in the article.Let me know what happens
--
With Regards

Raul Thomas
Eisen said:
Raul,

SQL Server exisits, it contains the following:

Key Value
APILevel 2
ConnectFunctions YYY
CPTimeout 60
Driver C:/WinNT/System32/SQLSRV32.dll
DriverODBCVer 03.50
FileUsage 0
Setup C:/WinNT/System32/SQLSRV32.dll
SQLLevel 1

I hope these means something to you, because I am absolutely clueless.

Thanks for your patience and guidance,

Regards,
Eisen

Raul said:
Hi Einsen

Can yo Go to start > run > regedit and naviagate to the following keys

H_Key_Local_Machine > Software > ODBC > odbcinst.ini > SQL server exist
--
With Regards

Raul Thomas
Eisen said:
Right...It says the following.
#################################

Starting Service ...

SQL_Latin1_General_CP1_CI_AS

-m -Q -T4022 -T3659

Connecting to Server ...

driver={sql
server};server=ECTOSHIBA\MICROSOFTSMLBIZ;UID=sa;PWD=;database=master

[Microsoft][ODBC SQL Server Driver]Client unable to establish
connection

[Microsoft][ODBC SQL Server Driver]Unable to load communication module.
Driver has not been correctly installed.

#################################

It looks like driver errors, please advise.

Regards,
Eisen

:

Hi Eisen

Can you browse to the following folder C:\Program Files\Microsoft SQL
Server\MSSQL$MICROSOFTSMLBIZ\Install and check if you have a file
called
confgsvr.out .If you have do have the same try opening it on notepad
and
let
me know what is says ?
--
With Regards

Raul Thomas
Raul,

Uninstalled BCM, .Net Frame and that MSSM SQL stuff to start fresh.
It
went well until MsiInstaller reported an error, "SQL Server Desktop
Engine -
Setup failed to configure the server. Refer to the server error logs
and
setup error logs for more information."

I am not aware of any server needed to be configured. Should I be?

Is it trying to connect to a server somewhere?

I could see that .Net Frame 1.1 had been installed succefully in the
Add /
Remove Programs.

I really wonder if BCM v2 is compatible with Outlook 2003 SP1
(11.8010.6360).

Any more clues or suggestions to help me get through this nightmare
will
be
appreciated.


:

Hi Eisen

This error message might occur if there is corruption with .Net
Frame
Work
..Uninstall all version of .Net Frame Work from add / remove
program.Once
this is done do a reinstall of BCM V2 to recreate .Net

Hope this helps
--
With Regards

Raul Thomas
Hi,

I have just reinstalled BCM v2 into my Windows 2000 SP4, when I
start
Outlook 2003, I received lots of error messages but a common
message
as
follows:

.Net Framework
An unhandled exception has occured in a component. Access is
denined:
"Accessibility"

Keep clicking continue would eventually get rid of all these
messages.

I am DESPERATE to recover all my database but without access to
BCM,
it
is
hopeless.

Would someone be able to help me out please?

Thank you.
Eisen
Click to expand...
Click to expand...
Click to expand...
 
Hi Einsen

I would want you to try running an MDAC componet checker before you try the
earlier step that i mentioned
this is the link to download the same
http://www.microsoft.com/downloads/...f6-4a21-4b43-bf53-14332ef092c9&DisplayLang=en
also refer the following link below link for usage
http://support.microsoft.com/default.aspx?scid=kb;en-us;307255
--
With Regards

Raul Thomas
Eisen said:
Raul,

SQL Server exisits, it contains the following:

Key Value
APILevel 2
ConnectFunctions YYY
CPTimeout 60
Driver C:/WinNT/System32/SQLSRV32.dll
DriverODBCVer 03.50
FileUsage 0
Setup C:/WinNT/System32/SQLSRV32.dll
SQLLevel 1

I hope these means something to you, because I am absolutely clueless.

Thanks for your patience and guidance,

Regards,
Eisen

Raul said:
Hi Einsen

Can yo Go to start > run > regedit and naviagate to the following keys

H_Key_Local_Machine > Software > ODBC > odbcinst.ini > SQL server exist
--
With Regards

Raul Thomas
Eisen said:
Right...It says the following.
#################################

Starting Service ...

SQL_Latin1_General_CP1_CI_AS

-m -Q -T4022 -T3659

Connecting to Server ...

driver={sql
server};server=ECTOSHIBA\MICROSOFTSMLBIZ;UID=sa;PWD=;database=master

[Microsoft][ODBC SQL Server Driver]Client unable to establish
connection

[Microsoft][ODBC SQL Server Driver]Unable to load communication module.
Driver has not been correctly installed.

#################################

It looks like driver errors, please advise.

Regards,
Eisen

:

Hi Eisen

Can you browse to the following folder C:\Program Files\Microsoft SQL
Server\MSSQL$MICROSOFTSMLBIZ\Install and check if you have a file
called
confgsvr.out .If you have do have the same try opening it on notepad
and
let
me know what is says ?
--
With Regards

Raul Thomas
Raul,

Uninstalled BCM, .Net Frame and that MSSM SQL stuff to start fresh.
It
went well until MsiInstaller reported an error, "SQL Server Desktop
Engine -
Setup failed to configure the server. Refer to the server error logs
and
setup error logs for more information."

I am not aware of any server needed to be configured. Should I be?

Is it trying to connect to a server somewhere?

I could see that .Net Frame 1.1 had been installed succefully in the
Add /
Remove Programs.

I really wonder if BCM v2 is compatible with Outlook 2003 SP1
(11.8010.6360).

Any more clues or suggestions to help me get through this nightmare
will
be
appreciated.


:

Hi Eisen

This error message might occur if there is corruption with .Net
Frame
Work
..Uninstall all version of .Net Frame Work from add / remove
program.Once
this is done do a reinstall of BCM V2 to recreate .Net

Hope this helps
--
With Regards

Raul Thomas
Hi,

I have just reinstalled BCM v2 into my Windows 2000 SP4, when I
start
Outlook 2003, I received lots of error messages but a common
message
as
follows:

.Net Framework
An unhandled exception has occured in a component. Access is
denined:
"Accessibility"

Keep clicking continue would eventually get rid of all these
messages.

I am DESPERATE to recover all my database but without access to
BCM,
it
is
hopeless.

Would someone be able to help me out please?

Thank you.
Eisen
Click to expand...
Click to expand...
Click to expand...
 
Back
Top