unable to install

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

After selecting the empty formatted partition to install Vista on I get a
message that the driver M1573 is necessary to enter the hard disk (ULI SATA
Controller). I need to insert a cd or diskette with the driver. When I insert
the CD with the drivers that came with my Motherboard (ASUS P5RD1-VM) it says
it can't find the driver. I have also used the Windows Vista Upgrade Advisor
which said that the driver was available and also the rest of my software was
compatible. When I look on internet for drivers I cannot find what I am
looking for. What can I do to get the beta installed on my computer?
 
Try putting the drivers in the root of a diskette, cd, or thumb drive. This
was necessary in the early beta 1 days but I thought it had changed. Still
worth a try.
 
I put the driver on a new empty cd and during installation I pressed load
driver and I was able to select the driver. But after selecting it came with
the following message: The [ULI SATA / RAID Cotroller (M1573)
(O:\ULISATA.INF)] device driver could not be installed. Make sure the driver
files are correct and located on the driver installation media. On the CD I
put the following 3 programs: m5287.sys, ulisata.cat and ULISATA.INF. Is
there something I am doing wrong or is there a different solution?
 
Did you put all the files on the root or did you just move folders onto the
cd?

Kwad said:
I put the driver on a new empty cd and during installation I pressed load
driver and I was able to select the driver. But after selecting it came
with
the following message: The [ULI SATA / RAID Cotroller (M1573)
(O:\ULISATA.INF)] device driver could not be installed. Make sure the
driver
files are correct and located on the driver installation media. On the CD
I
put the following 3 programs: m5287.sys, ulisata.cat and ULISATA.INF. Is
there something I am doing wrong or is there a different solution?

Kwad said:
After selecting the empty formatted partition to install Vista on I get a
message that the driver M1573 is necessary to enter the hard disk (ULI
SATA
Controller). I need to insert a cd or diskette with the driver. When I
insert
the CD with the drivers that came with my Motherboard (ASUS P5RD1-VM) it
says
it can't find the driver. I have also used the Windows Vista Upgrade
Advisor
which said that the driver was available and also the rest of my software
was
compatible. When I look on internet for drivers I cannot find what I am
looking for. What can I do to get the beta installed on my computer?
Click to expand...
Click to expand...
 
The original CD contains several folders with several drivers. I only copied
the 3 programs (m5287.sys, ulisata.cat and ULISATA.INF) onto the empty/new CD.

Colin Barnhorst said:
Did you put all the files on the root or did you just move folders onto the
cd?

Kwad said:
I put the driver on a new empty cd and during installation I pressed load
driver and I was able to select the driver. But after selecting it came
with
the following message: The [ULI SATA / RAID Cotroller (M1573)
(O:\ULISATA.INF)] device driver could not be installed. Make sure the
driver
files are correct and located on the driver installation media. On the CD
I
put the following 3 programs: m5287.sys, ulisata.cat and ULISATA.INF. Is
there something I am doing wrong or is there a different solution?

Kwad said:
After selecting the empty formatted partition to install Vista on I get a
message that the driver M1573 is necessary to enter the hard disk (ULI
SATA
Controller). I need to insert a cd or diskette with the driver. When I
insert
the CD with the drivers that came with my Motherboard (ASUS P5RD1-VM) it
says
it can't find the driver. I have also used the Windows Vista Upgrade
Advisor
which said that the driver was available and also the rest of my software
was
compatible. When I look on internet for drivers I cannot find what I am
looking for. What can I do to get the beta installed on my computer?
Click to expand...
Click to expand...
Click to expand...
 
Back in the early days of Beta 1 we were instructed to put all the files on
the driver diskette into the root of a new one. I think the problem that
caused Vista not to see the drivers has been fixed, but thought I would
throw it out here.

Kwad said:
The original CD contains several folders with several drivers. I only
copied
the 3 programs (m5287.sys, ulisata.cat and ULISATA.INF) onto the empty/new
CD.

Colin Barnhorst said:
Did you put all the files on the root or did you just move folders onto
the
cd?

Kwad said:
I put the driver on a new empty cd and during installation I pressed
load
driver and I was able to select the driver. But after selecting it came
with
the following message: The [ULI SATA / RAID Cotroller (M1573)
(O:\ULISATA.INF)] device driver could not be installed. Make sure the
driver
files are correct and located on the driver installation media. On the
CD
I
put the following 3 programs: m5287.sys, ulisata.cat and ULISATA.INF.
Is
there something I am doing wrong or is there a different solution?

:

After selecting the empty formatted partition to install Vista on I
get a
message that the driver M1573 is necessary to enter the hard disk (ULI
SATA
Controller). I need to insert a cd or diskette with the driver. When I
insert
the CD with the drivers that came with my Motherboard (ASUS P5RD1-VM)
it
says
it can't find the driver. I have also used the Windows Vista Upgrade
Advisor
which said that the driver was available and also the rest of my
software
was
compatible. When I look on internet for drivers I cannot find what I
am
looking for. What can I do to get the beta installed on my computer?
Click to expand...
Click to expand...
Click to expand...
 
ok, thanks for that, anything else I can try in the meantime?

Colin Barnhorst said:
Back in the early days of Beta 1 we were instructed to put all the files on
the driver diskette into the root of a new one. I think the problem that
caused Vista not to see the drivers has been fixed, but thought I would
throw it out here.

Kwad said:
The original CD contains several folders with several drivers. I only
copied
the 3 programs (m5287.sys, ulisata.cat and ULISATA.INF) onto the empty/new
CD.

Colin Barnhorst said:
Did you put all the files on the root or did you just move folders onto
the
cd?

I put the driver on a new empty cd and during installation I pressed
load
driver and I was able to select the driver. But after selecting it came
with
the following message: The [ULI SATA / RAID Cotroller (M1573)
(O:\ULISATA.INF)] device driver could not be installed. Make sure the
driver
files are correct and located on the driver installation media. On the
CD
I
put the following 3 programs: m5287.sys, ulisata.cat and ULISATA.INF.
Is
there something I am doing wrong or is there a different solution?

:

After selecting the empty formatted partition to install Vista on I
get a
message that the driver M1573 is necessary to enter the hard disk (ULI
SATA
Controller). I need to insert a cd or diskette with the driver. When I
insert
the CD with the drivers that came with my Motherboard (ASUS P5RD1-VM)
it
says
it can't find the driver. I have also used the Windows Vista Upgrade
Advisor
which said that the driver was available and also the rest of my
software
was
compatible. When I look on internet for drivers I cannot find what I
am
looking for. What can I do to get the beta installed on my computer?
Click to expand...
Click to expand...
Click to expand...
 
I'll post if I think of anything. Good luck.

Kwad said:
ok, thanks for that, anything else I can try in the meantime?

Colin Barnhorst said:
Back in the early days of Beta 1 we were instructed to put all the files
on
the driver diskette into the root of a new one. I think the problem that
caused Vista not to see the drivers has been fixed, but thought I would
throw it out here.

Kwad said:
The original CD contains several folders with several drivers. I only
copied
the 3 programs (m5287.sys, ulisata.cat and ULISATA.INF) onto the
empty/new
CD.

:

Did you put all the files on the root or did you just move folders
onto
the
cd?

I put the driver on a new empty cd and during installation I pressed
load
driver and I was able to select the driver. But after selecting it
came
with
the following message: The [ULI SATA / RAID Cotroller (M1573)
(O:\ULISATA.INF)] device driver could not be installed. Make sure
the
driver
files are correct and located on the driver installation media. On
the
CD
I
put the following 3 programs: m5287.sys, ulisata.cat and
ULISATA.INF.
Is
there something I am doing wrong or is there a different solution?

:

After selecting the empty formatted partition to install Vista on I
get a
message that the driver M1573 is necessary to enter the hard disk
(ULI
SATA
Controller). I need to insert a cd or diskette with the driver.
When I
insert
the CD with the drivers that came with my Motherboard (ASUS
P5RD1-VM)
it
says
it can't find the driver. I have also used the Windows Vista
Upgrade
Advisor
which said that the driver was available and also the rest of my
software
was
compatible. When I look on internet for drivers I cannot find what
I
am
looking for. What can I do to get the beta installed on my
computer?
Click to expand...
Click to expand...
Click to expand...
 
Back
Top