uDOC boot problem

  • Thread starter Thread starter mohamed hanif
  • Start date Start date
M

mohamed hanif

hi,
I have a M-System uDOC, 2GB size. I like to boot XPe from that. But i
cant
format the uDOC with the ufdprep.exe because its not the removable
media. Can
any one help me. Thanks in advance.

with best regards,
KS.Mohamed hanif
 
The uDOC has it's own set of preperation and formating tools - at least it
used too. I can't seem to find the link on their website.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit
 
If you have FP2007 in your database, you need to add "USB Boot 2.0"
component, if not you have to add a component from M-Systems (Sandisk). In
the package from M-Systems you will find also a preparation tool and
description how to do it. If you are able to connect your uDOC via USB to
your PC then you only need to create and format a partition with Disk Manager
and make it active. After that you can copy your build to the uDOC and boot
from it.

You will find all you need under
http://www.m-systems.com/site/en-US/Support/SoftwareDownload/uDOC_Boot_Files.htm

Best Regards,
Thomas Heinrich
 
thanks,

But i used both methods.
1.with USB boot 2.0
2.with the component given by the M-sys.

may you where i can get the formatufd.exe to format my uDOC.

with best regards,
KSMH
 
Back
Top