TV-Overscan with CAT 3.7

  • Thread starter Thread starter Tony DiMarzio
  • Start date Start date
T

Tony DiMarzio

Does anyone know of a way to get TV-Overscan enabled with CAT 3.7? (which
reg key) I have reasons for not using 3.8 but I don't want to lose
TV-Overscan

thanks!
 
Rage3dTweak will do it and the reg entry was posted here a few days ago,
look for it..

Mike
 
The reg entry posted was:

"Look for :

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Video\{296ECCED-01B1-419E-A3
9F-07FC49E180B6}\0000

Or similar. You'll pick out the ATI-parts by yourself

Add new DWord: TVEnableOverScan and set value to: 1"

I have tried this and it does not work. It has the effect of vertically
shifting the display on the tv by 10%, but definitely not overscan
 
OOPS... I jumped the proverbial gun. This does work. You have to add the
dword to both the 9800 primary and 9800 secondary keys.. reboot, and even
then it wont be enabled. At this point the overscan button will be available
to you in the ATI control panel and it will work if used, but it is not
enabled by default or turned on by the previous registry additions.
 
install omega driver


Tony DiMarzio said:
OOPS... I jumped the proverbial gun. This does work. You have to add the
dword to both the 9800 primary and 9800 secondary keys.. reboot, and even
then it wont be enabled. At this point the overscan button will be available
to you in the ATI control panel and it will work if used, but it is not
enabled by default or turned on by the previous registry additions.
Click to expand...
 
Back
Top