TV Output - Multiple

  • Thread starter Thread starter Ryan P. Kennedy
  • Start date Start date
R

Ryan P. Kennedy

Hello:

I have four TVs that I want to connect to a computer so that the computer's
display will show on all of the TVs. I know most video cards have one TV
Output connection, however I have four TVs.

Does anyone know of a card or board that has multiple TV output connections.

Appreciate any help.


Regards,

Ryan
 
I'm not aware of any card that has 4 TV outputs, but it should be fairly easy to
set up. Are you looking to send the composite video signal out or S-Video? You
could run either signal to a distribution box of some sort or to an A/V receiver
that has multiple outputs. Another easy option would be to send the signal to an
RF Modulator and then use Coax and splitters to feed the Televisions on channel
3 or 4.
-steve
 
Ryan P. Kennedy said:
I have four TVs that I want to connect to a computer so that the
computer's display will show on all of the TVs. I know most video
cards have one TV Output connection, however I have four TVs.

Does anyone know of a card or board that has multiple TV output
connections.
Click to expand...

Assuming the output is modulated RF carrying composite video, all
you need is three signal splitters, matching 75 ohm lines. Each
splitter contains three resistors. You can build a breadboard of
them for about 50 cents.
 
Back
Top