TV Cards in RC2

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I was able to get my Hauppage PVR-150 to work, but only after a clean
install, the prior install over RC1 gave me fits with MC crashing everytime I
went near the TV options. In your case it sounds like a driver problem.
 
Do you have the same problem with both the analog and with the digital OTA
channels( which should be showing at the very high end of your EPG)?
If you run a test bypassing the splitter do you have the same problems?
 
I have and ADS Tech HDTV card in my computer that has an analog tuner and
hdtv tuner for over the air broadcasts. I using a splitter to modem for high
speed internet which allows me to get standard cable. If I use the media
center it finds the card and all the channels and then plays the audio only
no video. Finally media center tells me I lost the video signal as it is to
weak. I run a 3rd party application (Sage TV 15 day trial version). It finds
all my stations and plays fine. However I get no sound. I tried muting the
mike inputs and/or line in and I still get no sound. Has anyone got media
center to work with any tv tuner in RC2?
 
The Twinhan PCI digital tuner card in my machine functions correctly under
Vista RC2. The drivers weren't on the Vista DVD but were installed off
Windows Update on the first reboot after installation of Vista.

Nick
 
Does your PVR-150 FM radio feature working?

Allen DeKorsey said:
I was able to get my Hauppage PVR-150 to work, but only after a clean
install, the prior install over RC1 gave me fits with MC crashing
everytime I
went near the TV options. In your case it sounds like a driver problem.
Click to expand...
 
I have RC1, and while I have finally got the video working (PVR), I am still
having issues with Audio (line in and recording sound). Is there a
significant positive (or other) difference between RC1 and RC2 in terms of
dealing with the TV Cards?
 
Back
Top