troubleshooting network setup

  • Thread starter Thread starter chaz
  • Start date Start date
C

chaz

I'll try to be as detailed as I can,

basicaly I have two computers connetced via a hub which is
connected to a DSL, for some reason one computer has
access to the other, but not vice versa.

I get a "\\comp1\c is not accessible, the server is not
configured for transations"

I've compaired both configurations between the two, and am
a little stumped.

originaly when I set them up there were both working, but
since then something has changed.


thx in advance..

chaz
 
Are both computers W2k? Make sure they are in the same workgroup, and all
useraccounts exist on all computers.
What does a IPCONFIG /All give on both?

Marina
 
thx 4 the reply,

yes both are w2k, and are in the same workgroups, I'm able
to manualy connect to the second computer via RUN: \\comp2
\c but can't access it through the windows explorer

both have access to the net though the hub witch is
connected to the dsl, so I'm down to trying to get \\comp1
to see \\comp2 through windows explorer
 
Back
Top