Trouble setting network media speed!

  • Thread starter Thread starter Christy Chiu
  • Start date Start date
C

Christy Chiu

Hi,

My PC has wired connection to D-Link DI-614+ router through a Linksys NIC
(Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4). Both the NIC and the
router should support 100 Mbps. However whenever I configure my NIC speed to
use 100BaseTX I lose the connection, while only 10BaseTX works fine. Before
I bought the DI-614+ I used a router of different brand, and I was able to
use 100BaseTX, until I switched to DI-614+. However my Dell laptop has no
trouble connecting at 100Mbps (wired) with the DI-614+. Can someone please
tell me what I"m missing?

Thanks.
 
Christy said:
Hi,

My PC has wired connection to D-Link DI-614+ router through a Linksys NIC
(Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4). Both the NIC and the
router should support 100 Mbps. However whenever I configure my NIC speed to
use 100BaseTX I lose the connection, while only 10BaseTX works fine. Before
I bought the DI-614+ I used a router of different brand, and I was able to
use 100BaseTX, until I switched to DI-614+. However my Dell laptop has no
trouble connecting at 100Mbps (wired) with the DI-614+. Can someone please
tell me what I"m missing?

Thanks.
Try setting your PC NIC to autonegotiate. Sounds like the DI-614+
can't tell what setting your Linksys nic uses.

regards,

SteveC
======
If at first you don't succeed, forget skydiving
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top