transfer digital video to MM2

  • Thread starter Thread starter Joe
  • Start date Start date
J

Joe

I purchased Sony digital camera DCR-HC85 and I am trying
to transfer video from the camera to MM2 on a laptop. The
computer can handle the tech requirements. I put a
firewire card in the slot and tried to capture the video.
I used two different firewire cards and cables. Could
someone PLEASE help me. Thank you so very much. Joe
 
It sure would help if you'd give us a clue as to what you're doing and what
happened and why you can't capture. It should be a simple matter of

1) Put the tape you want to capture in the camera, turn the camera off.

2) Turn on the computer,

3) When the computer is booted up, connect the iLink or DV port on the
camera to the computer.

4) Turn the camera on in VCR more (not Record or Camera mode).

5) Wait for some feedback on the screen telling you when the camera is
recognized.

If you haven't already done so, you should read the instructions that came
with the camera, as well as the Help in Movie Maker or the basic instructions
at www.microsoft.com/moviemaker.
 
Back
Top