The Routing and Remote Access service terminated

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I'm trying to set up a home network with two Win XP machines. However, while
in the wizzard, I get the error message. In the Event log it says <The
Routing and Remote Access service terminated with service-specific error
2147483720 (0x80000048).> In the System log the RAS is Started (I tried it
both Manually and Auto). A MS KB article suggests some solutions, but refers
to a 2000 and 2003 Servers, which is not my case...
May someone please help me to fix this problem and get RAS running?
Thanks.
 
These search results may help,
ras error code
you may receive "The Routing and Remote Access service terminated with service-specific error 711" ...
http://www.chicagotech.net/raserrors.htm -

Event ID Troubleshooting
Event ID: 7024 - Description: The Routing And Remote Access Service service terminated with service-specific error 1003. Resolutions: 1. Make sure Remote ...
http://www.chicagotech.net/wineventid.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I'm trying to set up a home network with two Win XP machines. However, while
in the wizzard, I get the error message. In the Event log it says <The
Routing and Remote Access service terminated with service-specific error
2147483720 (0x80000048).> In the System log the RAS is Started (I tried it
both Manually and Auto). A MS KB article suggests some solutions, but refers
to a 2000 and 2003 Servers, which is not my case...
May someone please help me to fix this problem and get RAS running?
Thanks.
 
Robert,
thanks for your suggestions. I looked them over and they all look too technical for my level. Nevertheless, I tried the rarepair, but it did not help. I got the same error message...
I used to have network before, both wireless and cable, but somehow they disappeared...
Regards,
Ilya

These search results may help,
ras error code
you may receive "The Routing and Remote Access service terminated with service-specific error 711" ...
http://www.chicagotech.net/raserrors.htm -

Event ID Troubleshooting
Event ID: 7024 - Description: The Routing And Remote Access Service service terminated with service-specific error 1003. Resolutions: 1. Make sure Remote ...
http://www.chicagotech.net/wineventid.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I'm trying to set up a home network with two Win XP machines. However, while
in the wizzard, I get the error message. In the Event log it says <The
Routing and Remote Access service terminated with service-specific error
2147483720 (0x80000048).> In the System log the RAS is Started (I tried it
both Manually and Auto). A MS KB article suggests some solutions, but refers
to a 2000 and 2003 Servers, which is not my case...
May someone please help me to fix this problem and get RAS running?
Thanks.
 
Resolutions: 1. Make sure Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are enabled and running.


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Robert,
thanks for your suggestions. I looked them over and they all look too technical for my level. Nevertheless, I tried the rarepair, but it did not help. I got the same error message...
I used to have network before, both wireless and cable, but somehow they disappeared...
Regards,
Ilya

These search results may help,
ras error code
you may receive "The Routing and Remote Access service terminated with service-specific error 711" ...
http://www.chicagotech.net/raserrors.htm -

Event ID Troubleshooting
Event ID: 7024 - Description: The Routing And Remote Access Service service terminated with service-specific error 1003. Resolutions: 1. Make sure Remote ...
http://www.chicagotech.net/wineventid.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I'm trying to set up a home network with two Win XP machines. However, while
in the wizzard, I get the error message. In the Event log it says <The
Routing and Remote Access service terminated with service-specific error
2147483720 (0x80000048).> In the System log the RAS is Started (I tried it
both Manually and Auto). A MS KB article suggests some solutions, but refers
to a 2000 and 2003 Servers, which is not my case...
May someone please help me to fix this problem and get RAS running?
Thanks.
 
OneCare could be the problem. Can you disable it for testing?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Sure, I've checked all the services, all started...
I think, I didn't mention that I'm running WLOC (Windows Live OneCare)
Service. If you're familiar with it, do you think it could be the culprit?
 
Well, it's WLOC. Within it there is a tool for adjusting firewall. After
adjustment, I was able to "create" the network... However, it does not work.
On one machine the error says "the path not found", on another "it's not
accessible".
Any suggestions on how to proceed from here?
Ilya

ilyaz said:
I'll try. But before I do it, I'd like to check with the WLOC people..
--
Ilya Zeldes
Fort Myers, FL


Robert L said:
OneCare could be the problem. Can you disable it for testing?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Sure, I've checked all the services, all started...
I think, I didn't mention that I'm running WLOC (Windows Live OneCare)
Service. If you're familiar with it, do you think it could be the
culprit?
--
Ilya Zeldes
Fort Myers, FL


Robert L said:
Resolutions: 1. Make sure Remote Access Connection Manager service,
Click to expand...
Remote Access Auto Connection Manager, and the Telephony service are
enabled and running.
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Robert,
thanks for your suggestions. I looked them over and they all look
Click to expand...
too technical for my level. Nevertheless, I tried the rarepair, but it
did not help. I got the same error message...
I used to have network before, both wireless and cable, but somehow they disappeared...
Regards,
Ilya

"Robert L [MVP - Networking]" <[email protected]> wrote in
Click to expand...
message news:[email protected]...
These search results may help,
ras error code
you may receive "The Routing and Remote Access service
Click to expand...
terminated with service-specific error 711" ...
http://www.chicagotech.net/raserrors.htm -

Event ID Troubleshooting
Event ID: 7024 - Description: The Routing And Remote Access
Click to expand...
Service service terminated with service-specific error 1003. Resolutions:
1. Make sure Remote ...
http://www.chicagotech.net/wineventid.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I'm trying to set up a home network with two Win XP machines. However, while
in the wizzard, I get the error message. In the Event log it says <The
Routing and Remote Access service terminated with service-specific error
2147483720 (0x80000048).> In the System log the RAS is Started (I tried it
both Manually and Auto). A MS KB article suggests some solutions, but refers
to a 2000 and 2003 Servers, which is not my case...
May someone please help me to fix this problem and get RAS running?
Thanks.
Click to expand...
Click to expand...
Click to expand...
 
This search result may help,

Access issuesSYMPTOMS: When you attempt to connect to a network share, you may receive the following error message: \\Servername\share is not accessible. Access Denied. ...
http://www.chicagotech.net/accesserrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Well, it's WLOC. Within it there is a tool for adjusting firewall. After
adjustment, I was able to "create" the network... However, it does not work.
On one machine the error says "the path not found", on another "it's not
accessible".
Any suggestions on how to proceed from here?
Ilya

ilyaz said:
I'll try. But before I do it, I'd like to check with the WLOC people..
--
Ilya Zeldes
Fort Myers, FL


Robert L said:
OneCare could be the problem. Can you disable it for testing?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Sure, I've checked all the services, all started...
I think, I didn't mention that I'm running WLOC (Windows Live OneCare)
Service. If you're familiar with it, do you think it could be the
culprit?
--
Ilya Zeldes
Fort Myers, FL


Robert L said:
Resolutions: 1. Make sure Remote Access Connection Manager service,
Click to expand...
Remote Access Auto Connection Manager, and the Telephony service are
enabled and running.
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Robert,
thanks for your suggestions. I looked them over and they all look
Click to expand...
too technical for my level. Nevertheless, I tried the rarepair, but it
did not help. I got the same error message...
I used to have network before, both wireless and cable, but somehow they disappeared...
Regards,
Ilya

"Robert L [MVP - Networking]" <[email protected]> wrote in
Click to expand...
message news:[email protected]...
These search results may help,
ras error code
you may receive "The Routing and Remote Access service
Click to expand...
terminated with service-specific error 711" ...
http://www.chicagotech.net/raserrors.htm -

Event ID Troubleshooting
Event ID: 7024 - Description: The Routing And Remote Access
Click to expand...
Service service terminated with service-specific error 1003. Resolutions:
1. Make sure Remote ...
http://www.chicagotech.net/wineventid.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I'm trying to set up a home network with two Win XP machines. However, while
in the wizzard, I get the error message. In the Event log it says <The
Routing and Remote Access service terminated with service-specific error
2147483720 (0x80000048).> In the System log the RAS is Started (I tried it
both Manually and Auto). A MS KB article suggests some solutions, but refers
to a 2000 and 2003 Servers, which is not my case...
May someone please help me to fix this problem and get RAS running?
Thanks.
Click to expand...
Click to expand...
Click to expand...
 
Bob,
I've tried several suggestions - nothing works... The funny thing, yesterday, I finally set up a network on one machine (actually a Guest) and was able to get into the files on the Host machine. There was NO network on the Host... Do not ask me how could it be...This morning, after rebooting, the network on the Guest disappeared...
Thanks for your help.
Ilya

This search result may help,

Access issues SYMPTOMS: When you attempt to connect to a network share, you may receive the following error message: \\Servername\share is not accessible. Access Denied. ...
http://www.chicagotech.net/accesserrors.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Well, it's WLOC. Within it there is a tool for adjusting firewall. After
adjustment, I was able to "create" the network... However, it does not work.
On one machine the error says "the path not found", on another "it's not
accessible".
Any suggestions on how to proceed from here?
Ilya

ilyaz said:
I'll try. But before I do it, I'd like to check with the WLOC people..
--
Ilya Zeldes
Fort Myers, FL


Robert L said:
OneCare could be the problem. Can you disable it for testing?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
Sure, I've checked all the services, all started...
I think, I didn't mention that I'm running WLOC (Windows Live OneCare)
Service. If you're familiar with it, do you think it could be the
culprit?
--
Ilya Zeldes
Fort Myers, FL


Robert L said:
Resolutions: 1. Make sure Remote Access Connection Manager service,
Click to expand...
Remote Access Auto Connection Manager, and the Telephony service are
enabled and running.
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Robert,
thanks for your suggestions. I looked them over and they all look
Click to expand...
too technical for my level. Nevertheless, I tried the rarepair, but it
did not help. I got the same error message...
I used to have network before, both wireless and cable, but somehow they disappeared...
Regards,
Ilya

"Robert L [MVP - Networking]" <[email protected]> wrote in
Click to expand...
message news:[email protected]...
These search results may help,
ras error code
you may receive "The Routing and Remote Access service
Click to expand...
terminated with service-specific error 711" ...
http://www.chicagotech.net/raserrors.htm -

Event ID Troubleshooting
Event ID: 7024 - Description: The Routing And Remote Access
Click to expand...
Service service terminated with service-specific error 1003. Resolutions:
1. Make sure Remote ...
http://www.chicagotech.net/wineventid.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I'm trying to set up a home network with two Win XP machines. However, while
in the wizzard, I get the error message. In the Event log it says <The
Routing and Remote Access service terminated with service-specific error
2147483720 (0x80000048).> In the System log the RAS is Started (I tried it
both Manually and Auto). A MS KB article suggests some solutions, but refers
to a 2000 and 2003 Servers, which is not my case...
May someone please help me to fix this problem and get RAS running?
Thanks.
Click to expand...
Click to expand...
Click to expand...
 
Back
Top