TFTscreen

[Guest]

I have just plugged in a new tft monitor but on the screen it say's out of range does anyone know what to do it won't go off

 

[Jerry]

Ask the people that made the monitor.

I have just plugged in a new tft monitor but on the screen it say's out of

range does anyone know what to do it won't go off

 

[Cerridwen]

I have just plugged in a new tft monitor but on the screen it say's
out of range does anyone know what to do it won't go off

This is because your previous monitor (obviously a CRT) had a higher range
(CRTs generally do). You need to RTFM that came with the monitor, reboot
into safe mode and set the resolution and frequency the TFT can handle. Once
you've done that, reboot to normal and set it to the optimal recommend
resolution/frequency (again you'll need to RTFM to learn what that is).

 

[Sharon F]

I have just plugged in a new tft monitor but on the screen it say's out
of range does anyone know what to do it won't go off

Do you have your old monitor handy still? If yes, reattach that. Go into
Display properties and reduce the refresh rate and other settings within
the scope that the TFT uses. Example: While refresh rates greater than 75
are desirable with CRT, a TFT can usually give the same flicker free
experience with a setting around 60.