Tektronix Phaser 750 replace black

  • Thread starter Thread starter Ming the Merciless
  • Start date Start date
M

Ming the Merciless

My phaser 750 has decided the black cartridge is empty, I changed it
it still says stopped replace Black. Any ideas or service manual
availble
 
Hi,
try this...
Carefully remove the cartridge making sure to keep it level and avoid
shaking it,
Shine a small flashlight in the hole on one side and look if you see the
light on the other side.
If you do see the light then the cartridge is really empty. If you are not
sure then place a black tape
over the hole and see if it fools the pritner into thinking the cartridge
is full. Most likely your cartridge is really empty.

my 2 cents...
 
No its not empty, and I put the tape over the holes as well, I think
there must be a problem with the sensor. How to get to it is another
story.
regards
 
Back
Top