TCP/IP

  • Thread starter Thread starter prehmer
  • Start date Start date
P

prehmer

I'm pretty sure my TCP/IP protocol is corrupt. What
article # for SP would I find for manually removing and
reinstalling it.
Thanks
 
Ok... go into your control panel --> click the SYSTEM
icon --> click on the hardware tab --> click device
manager --> scroll down to network adapters and expand
it. Find your NIC card (card you used to connect to the
internet) and uninstall or delete it. now you must
restart you computer and you computer will recognize and
reinstall the NIC automatically, giving you a fresh
TCP/IP, and a new Local Area Connection. Keep in mind if
you had a special settings you must reconfigure your
protocol.
 
Hi,

You can follow the steps in this article to refresh TCP/IP using netsh:

299357 How to Reset Internet Protocol (TCP/IP) in Windows XP
http://support.microsoft.com/?id=299357

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties, and confers no rights.
 
-----Original Message-----
Hi,

You can follow the steps in this article to refresh TCP/IP using netsh:

299357 How to Reset Internet Protocol (TCP/IP) in Windows XP
http://support.microsoft.com/?id=299357

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties, and confers no rights.

.That didn't seem to cure the problem. What is also
Click to expand...
happening is the IPCONFIG commmand is giving me an error.
There has been and internal error and the system can not
find the file. The file is in the Winnt\system32 directory
 
Hi,

To re-install the TCP/Ip in Windows XP you do this

START->RUN AND TYPE THIS
NETSH INTERFACE IP RESET LOG.TXT
PRESS OK BUTTON

AFTER DOING THIS RE-BOOT THE MACHINE AND YOUR TCP/IP WILL
BE RE-INSTALLED.

GOOD LUCK!
 
Back
Top