Target Device

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello All,

I built the image and it is working only in the same machine i developed.

Now i want to deploy this image to another machine, i already transferred
the imagine to the other machine correctly. But when i boot the machine
nothing happens, no erros messages, nothing...

Before i run the image in another machine, i have to run the tap.exe tool in
the target machine and add it to the image i built?

Thanks in advance!
 
Maurit said:
Hello All,

I built the image and it is working only in the same machine i developed.

Now i want to deploy this image to another machine, i already transferred
the imagine to the other machine correctly. But when i boot the machine
nothing happens, no erros messages, nothing...

Before i run the image in another machine, i have to run the tap.exe tool in
the target machine and add it to the image i built?

Thanks in advance!
Click to expand...

Adding a second PMQ to an existing build can work, but it can result in
an unbootable mess - better to start again.
 
The other machine has hardware totally different from the first one. I really
tried to put two PMQ files in the same image, but a lot of problems happened
in the dependecy check. So i just put the pmq file from the new machine and
it worked!

Unfortunately the network card was not installed, i am working in this one
right now!

Thanks again!
 
I had to ask. It is not a good idea to mix hardware platform. The general
rule is to install XP Pro on every new platform and run tap.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit
 
Sean said:
I had to ask. It is not a good idea to mix hardware platform. The general
rule is to install XP Pro on every new platform and run tap.
Click to expand...
Indeed. Producing images that work well across a variety of systems is
keeping me pretty busy at the moment.
 
Back
Top