tape vids onto vhs via vcr from pc

  • Thread starter Thread starter dldk272727
  • Start date Start date
D

dldk272727

how is it done? im not sure exactly, it seems as if the few posts i
found while searching past posts are either too out dated or
confusing!! i have a new vcr and a hp pavilion about 3 years old
with windowsxp! thanks in advace
 
You'll need analog capture hardware such as a PVR-150 (www.hauppauge.com)
and some third party analog software, such as Roxio, Nero, WinDVD Creator,
PowerDirector etc.
 
how is it done? im not sure exactly, it seems as if the few posts i
found while searching past posts are either too out dated or
confusing!! i have a new vcr and a hp pavilion about 3 years old
with windowsxp! thanks in advace
Click to expand...

You want to transfer video files from your PC to your new VCR?
That is an unusual request in this day and age of DVD burners!
It is relatively easy, but dependent on your PC's graphics card.
Most graphics cards on 3 yr old PC's running XP will have TV-out
via an S-Video interface.
You connect this to your VCR, S-Video only carries the video signal
so you will have to connect the line out from your soundcard to
the line-in of the vcr to feed the audio.
Basically it just involves buying the correct cables to make the connections
and selecting the input on the VCR to record from (Usually L1 or L2)
Your VCR's instruction manual will detail this - probably as a connection
from another VCR or cam, just substitute your PC in the guide.
On your PC you may have to "activate" the TV-out/S-Video, but as
we have no details we can't guide you on that....
 
Back
Top