SYSTEM_LICENSE_VIOLATION

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I had built a working image of XPe using trial version of XPe. Than I bought
a license, I got the runtime PID, wrote it in the TD, but from that moment
everytime I try to boot the image, FBA runs fast then reboots and then I get
the message "SYSTEM_LICENSE_VIOLATION".
Anyone knows the reason?
I am using XPe with SP1.
 
Dave said:
I had built a working image of XPe using trial version of XPe. Than I bought
a license, I got the runtime PID, wrote it in the TD, but from that moment
everytime I try to boot the image, FBA runs fast then reboots and then I get
the message "SYSTEM_LICENSE_VIOLATION".
Anyone knows the reason?
I am using XPe with SP1.
Click to expand...

You've probably mis-typed the PID.
 
Yes, it is.
Btw. the PID is from the letter (WinXP Embedded Runtime), not from the CD
cover.
PID is typed right.
 
Dave said:
Yes, it is.
Btw. the PID is from the letter (WinXP Embedded Runtime), not from the CD
cover.
PID is typed right.

:
Click to expand...
*reaches down deep into the carrier bag*

Hard drive size set incorrectly in Target Designer?
 
Adora Belle Dearheart said:
*reaches down deep into the carrier bag*

Hard drive size set incorrectly in Target Designer?
Click to expand...

Yes, it is set corectly. Hard drive is 40GB, I set 5000 (maximum).
 
Sounds to me like you used a retail license pid in an evaluation image,. You
will need the retail toolkit in order to use the retail pid you received on
the license sticker.
Check with the distributor you received the eval toolkit and license from.

Jeff Trager
 
JT said:
Sounds to me like you used a retail license pid in an evaluation image,. You
will need the retail toolkit in order to use the retail pid you received on
the license sticker.
Check with the distributor you received the eval toolkit and license from.

Jeff Trager
Click to expand...

No, I used complet retail instalation from retail CDs and retail PID.

I'am back to tell you the problem is solved. The problem desapeared after
upgrading to SP2, absolutely don't know why. Upgrading to SP2 was the only
thing i have changed and from that time image works well.
 
Aha!

That was the problem!
The new PIDs are not working with SP1 without a
spezial QFE installed!
MS exended the PID rang through a QFE for SP1.
SP2 has the new rang already in.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Back
Top