system restore

  • Thread starter Thread starter Pam Beck
  • Start date Start date
P

Pam Beck

me again
Tried system restore today and it doesn't seem to work not even going back
to yesterday
Any answers
thanks Pam
 
Hi Pam,

Once System Restore goes bad, the only thing you can do is stop it and
restart it. Start/run services.msc, locate the SR service and doubleclick
it. Click the stop button, then set the startup type dropdown to disabled.
Click apply/ok, then reboot.

Then, check the "System Volume Information folder" on each drive and delete
any contents. Reverse the steps to restart it.

Be forewarned that doing this removes all existing restore points, but it
doesn't really matter as they weren't working anyways.

If this does not help, follow these steps to reinstall System Restore:

Go to the Control Panel/Folder Options/View tab, set it to "Show hidden
files and folders" and uncheck "Hide protected operating system files
[recommended]". Also uncheck "Hide extensions for known file types".

Then, open Windows Explorer from Start/All Programs and go to the
C:\Windows\Inf folder. Locate the sr.inf file, right-click it and choose
install.

You may need to either insert your WinXP CD or know where your I386 folder
is located on the hard drive. You may also need to know where the
\ServicePackFiles folder is (usually under the Windows directory).

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Windows
Windows isn't rocket science! That's my other hobby!

Associate Expert - WinXP - Expert Zone
 
--
Hi Rick so far so good , but a little lost as to find "
System Volume Information folder"

Thanks
Pam




Rick "Nutcase" Rogers said:
Hi Pam,

Once System Restore goes bad, the only thing you can do is stop it and
restart it. Start/run services.msc, locate the SR service and doubleclick
it. Click the stop button, then set the startup type dropdown to disabled.
Click apply/ok, then reboot.

Then, check the "System Volume Information folder" on each drive and delete
any contents. Reverse the steps to restart it.

Be forewarned that doing this removes all existing restore points, but it
doesn't really matter as they weren't working anyways.

If this does not help, follow these steps to reinstall System Restore:

Go to the Control Panel/Folder Options/View tab, set it to "Show hidden
files and folders" and uncheck "Hide protected operating system files
[recommended]". Also uncheck "Hide extensions for known file types".

Then, open Windows Explorer from Start/All Programs and go to the
C:\Windows\Inf folder. Locate the sr.inf file, right-click it and choose
install.

You may need to either insert your WinXP CD or know where your I386 folder
is located on the hard drive. You may also need to know where the
\ServicePackFiles folder is (usually under the Windows directory).

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Windows
Windows isn't rocket science! That's my other hobby!

Associate Expert - WinXP - Expert Zone



Pam Beck said:
me again
Tried system restore today and it doesn't seem to work not even going back
to yesterday
Any answers
thanks Pam
 
Hi, Pam.

In the Root of each drive, there should be a folder named "System Volume
Information". It's a System, Hidden file, so you'll have to remove those
Attributes or set WinXP to show you such files. There are several ways to
do this. Once you've followed Rick's instructions to make those files
visible, you should be able to see that file in Windows Explorer.

Or, in a "DOS" window, you can type:
dir "C:\System Volume Information" /a

This will show all the files in C:\ with that name, no matter what
attributes they have.

RC
--
R. C. White, CPA
San Marcos, TX
(e-mail address removed)
Microsoft Windows MVP

Pam Beck said:
Hi Rick so far so good , but a little lost as to find "
System Volume Information folder"

Thanks
Pam

Rick "Nutcase" Rogers said:
Hi Pam,

Once System Restore goes bad, the only thing you can do is stop it and
restart it. Start/run services.msc, locate the SR service and doubleclick
it. Click the stop button, then set the startup type dropdown to
disabled.
Click apply/ok, then reboot.

Then, check the "System Volume Information folder" on each drive and delete
any contents. Reverse the steps to restart it.

Be forewarned that doing this removes all existing restore points, but it
doesn't really matter as they weren't working anyways.

If this does not help, follow these steps to reinstall System Restore:

Go to the Control Panel/Folder Options/View tab, set it to "Show hidden
files and folders" and uncheck "Hide protected operating system files
[recommended]". Also uncheck "Hide extensions for known file types".

Then, open Windows Explorer from Start/All Programs and go to the
C:\Windows\Inf folder. Locate the sr.inf file, right-click it and choose
install.

You may need to either insert your WinXP CD or know where your I386
folder
is located on the hard drive. You may also need to know where the
\ServicePackFiles folder is (usually under the Windows directory).

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Windows

Pam Beck said:
me again
Tried system restore today and it doesn't seem to work not even going back
to yesterday
Any answers
thanks Pam
 
Back
Top