System Restore

  • Thread starter Thread starter Newbie Coder
  • Start date Start date
N

Newbie Coder

How to create a system restore point in VB.NET 2003 only, please?

Google never came up with anything of any use

TIA
 
That's VB 6 code & I already saw that before posting my question

Original post stated VB.NET 2003 code only & already checked Google
 
VB6 code isnt hard to convert to VB 1.1 or 2.0. most of that code should work
in 2003 or 2005, except the get and set. try it out first and see what happens
 
But my original question is VB.NET 2003 & I had already seen that code when
searching Google

Don't anyone actually read the post properly these days?

Since when in VB.NET 2003 C#/C++/J#/J++/HTML/Javascript/VB6..? It isn't

Its like asking for a translation of something in English & the replier
posting it in Chinese. Same rules, different situation
 
Again with the attitude!

For someone to hand you the code on a plate, they would have to convert the
only sample you seem to be able to find to YOUR particular flavour of .NET
and seeing as how trivial that particular conversion actually is, that isn't
going to happen.

If you do it youself, then not only will you learn how to go about
translating code from another 'language', you will probably also learn what
the code is actually doing (or supposed to do), You will probably also learn
some techniques that you might not have used before and you may stumble
across a better/more efficient/more elegant way of solving the problem.
 
Stephany

You cannot code yourself I see

You try to advise, but you have no idea I see

Keep your opinions to yourself & do yourself a favour & learn how to be a
programmer

As you see, I searched Google for VB.NET & it never came up with anything

Please do us a favour & leave the newsgroup because I have never seen once
you make a valid contribution
 
Newbie said:
Stephany

You cannot code yourself I see

You try to advise, but you have no idea I see

Keep your opinions to yourself & do yourself a favour & learn how to be a
programmer

As you see, I searched Google for VB.NET & it never came up with anything

Please do us a favour & leave the newsgroup because I have never seen once
you make a valid contribution
Click to expand...

I'm sure Stephany is able to defend herself, however your statement is
totally invalid. If you care to look, Stephany has contributed some
real gems to this NG in the past, whereas I only see bad attitude from
your posts!

It's obvious that you really just wanted someone to write your code,
well I don't think you're going to find that here, particularly with
your attitude.

The link to FreeVBcode.com was entirely valid, and would be easily
converted to .NET if you only took the time to read it. If you had
problems after that then I'm sure people would have gladly helped if you
had of POLITELY asked.

For my money, you're not much different to Aaron and MP and this will be
the last time I care to look at anything you write!

ShaneO

There are 10 kinds of people - Those who understand Binary and those who
don't.
 
ShaneO said:
I'm sure Stephany is able to defend herself, however your statement is
totally invalid. If you care to look, Stephany has contributed some
real gems to this NG in the past, whereas I only see bad attitude from
your posts!

It's obvious that you really just wanted someone to write your code,
well I don't think you're going to find that here, particularly with
your attitude.

The link to FreeVBcode.com was entirely valid, and would be easily
converted to .NET if you only took the time to read it. If you had
problems after that then I'm sure people would have gladly helped if
you had of POLITELY asked.

For my money, you're not much different to Aaron and MP and this will
be the last time I care to look at anything you write!

ShaneO

There are 10 kinds of people - Those who understand Binary and those
who
don't.
Click to expand...

He's posted negative stuff about Cor and Herfried when they
don't give him the exact answer he's looking for. I guess it was
Stephany's turn.

Newbie Coder, I've said this to you once, and I'll say it again:
Gettings answers in this newsgroup is a privilege, not a right.
People are not *obligated* to go off and spend time coming up with
a solution for your problem. You've been given part of a solution.
Can you really not convert code from VB6 to VB.net?
Heck, run it through the converter and see what you get, then
post questions asking for specific help. That would get you
farther than condemning the very people who can help you the most.

Robin S.
 
Thanks Shane :)

It's the same old story isn't it. An Aussie and a Kiwi will scrap with each
other till the cows come home, but when someone else picks on one of them,
he's got them both to deal with.
 
He's posted negative stuff about Cor and Herfried when they
don't give him the exact answer he's looking for. I guess it was
Stephany's turn.

Newbie Coder, I've said this to you once, and I'll say it again:
Gettings answers in this newsgroup is a privilege, not a right.
People are not *obligated* to go off and spend time coming up with
a solution for your problem. You've been given part of a solution.
Can you really not convert code from VB6 to VB.net?
Heck, run it through the converter and see what you get, then
post questions asking for specific help. That would get you
farther than condemning the very people who can help you the most.

Robin S.
Click to expand...

Hey Robin,

Newbie Coder / Master Programmer / etc THRIVE on getting under the skin of
others in the newsgroups. I dare say he'll be silenced (and get bored) if
his flames are completely ignored
 
Stephany said:
Thanks Shane :)

It's the same old story isn't it. An Aussie and a Kiwi will scrap with each
other till the cows come home, but when someone else picks on one of them,
he's got them both to deal with.
Click to expand...
You're damn right about that! :-)

I can't understand the rudeness and arrogance of what's been posted by
some individuals lately.

I know we should just ignore them, but maybe if their parents didn't
ignore their behaviour while they were growing up and gave them a clip
under the ear when it was deserved, we wouldn't have to put up with
their lack of common courtesy today!

ShaneO

There are 10 kinds of people - Those who understand Binary and those who
don't.
 
HYep .. HYep .. HYep ....

My children had learned that that sort of behaviour was unacceptable by the
time they were 4.

My grandchildren are still learning it, but none of them are 4 as yet.

But, don't worry, I'm just as capable of spitting my dummy as anybody but I
like to think it requires a tad more provocation than some of these people
have shown thus far.

I do try to ignore it but I do worry that visitors to this group (especially
those new to the game) might read a few isolated posts that contain
'allegations' that appear to be unrefuted and get the wrong idea. (The old
situation of humam nature where those who make the most noise tend to get
listened to the most.)

Unfortunately, it's just another case of a few trying to spoil things for
the rest.
 
Rad you're in the wrong newsgroup


Rad said:
Hey Robin,

Newbie Coder / Master Programmer / etc THRIVE on getting under the skin of
others in the newsgroups. I dare say he'll be silenced (and get bored) if
his flames are completely ignored
Click to expand...
 
Some real gems. Lets see the level of your coding Stephany.

I used this Newsgroup for the past 4 years & I haven't seen you in here. Yes
I had a year break so, I know you not an old timer

I will always code a reply if I have the time... But that is the difference
of a coder & a person who says they are good & gives mouth but nothing maybe
a Google link

By the way Stephany:

I have written the code now for what I wanted. Its not complete, but almost
& has more functionality then I originally wanted & used the Windows 2003
SDK to do it.

One up on you because you cannot even write in one language -
(e-mail address removed)
 
Well, it would be nice to see how long it takes you to provide a precis of
what this does and interesting to see your version of it:

Private Sub chkItemID_CheckedChanged(ByVal sender As Object, ByVal e As
EventArgs)

If chkItemID.Checked Then
txtItemID.Visible = False
cboItemID.Visible = True
If txtConnectionString.TextLength > 0 AndAlso cboTable.SelectedItem
IsNot Nothing AndAlso cboKeyColumn.SelectedItem IsNot Nothing Then
Application.DoEvents()
Cursor.Current = Cursors.WaitCursor
cboItemID.Items.Clear()
Dim _con As New OleDbConnection(txtConnectionString.Text)
Dim _com As New OleDbCommand("select " &
CType(cboKeyColumn.SelectedItem, String) & " from " &
CType(cboTable.SelectedItem, String) & " where " &
CType(cboKeyColumn.SelectedItem, String) & " is not null", _con)
_con.Open()
Dim _drdr As OleDbDataReader =
_com.ExecuteReader(CommandBehavior.CloseConnection)
While _drdr.Read
cboItemID.Items.Add(_drdr.GetString(0))
End While
_drdr.Close()
If cboItemID.Items.Count > 0 Then cboItemID.SelectedIndex = 0
Cursor.Current = Cursors.Default
End If
cboItemID.Focus()
Else
cboItemID.Visible = False
txtItemID.Visible = True
txtItemID.Focus()
End If

End Sub
 
So allow me to interject my own logic into this conversation...

You ID yourself as 'Newbie Coder' and come into this newsgroup asking for
assistance with your projects, demanding that people provide you with their
own code to a 'problem' that you are having. If not given what you want, you
then berate the poster like a child throwing a tantrum. When called on your
behavior, you state that...
I used this Newsgroup for the past 4 years & I haven't seen you in here.
Click to expand...

However, going back over the last four years of headers in this newsgroup,
you don't appear one single time until 11/24/2006? That is your second lie,
unless you are using an alias and you are only here trolling for your own
unknown reasons.

Stephany has been a great help in this newsgroup and I appreciate the fact
that she hasn't just given me the answer each and every time. She HAS,
however, responded quite well - in code - when it was necessary. She has
also responded in a timely fashion to YOUR challenge, but I see that you
have failed to respond at all. This only leads me to believe that you, sir,
or maam, are a fraud. Unwilling to do your own work and holding on to your
own job by the skin of your teeth, if you even are a programmer. Welcome to
the killfile!
 
Rad said:
Hey Robin,

Newbie Coder / Master Programmer / etc THRIVE on getting under the
skin of
others in the newsgroups. I dare say he'll be silenced (and get bored)
if
his flames are completely ignored
Click to expand...

I don't think Newbie Coder is quite on the level as MP or AK. I don't
really get the sense that he's purposely being a butthead the way I
do with the other two. But if he keeps going the way he's going,
nobody's going to respond to his requests for help any more.

Robin S.
 
Back
Top