P
Pannadharo
Am looking for information that can lead to fix for W2KAS when
installing 2G RAM.
Motherboard: Asus A7M266-D
Processor(s) (2): AMD Athalon XP 1800+
DIMM: KVR266X64C25/512
I have been running two KVR266X64C25/512 for about three years on this
server, but when I install two of the same chip W2KAS crashes with a
different STOP message each time, and never in the same stage of
bootup. Sometimes it will make it into the OS and allow me to run an
application, but the moment the application loads the OS crashes to a
reboot.
I tried inserting the /PAE switch in boot.ini, but this has not
corrected the problem.
However, when I remove the two new DIMM's W2KAS boots fine and
operates perfectly. I shut down the server, took out the old DIMM's
and put in the new DIMM's (still only using two chips) and W2KAS boots
fine and operates perfectly. The problem is when I insert all four
chips at once. At first I thought this could have been faulty chips
(all Non-ECC btw) so I bought two more and the problem is the same.
Please help ...
installing 2G RAM.
Motherboard: Asus A7M266-D
Processor(s) (2): AMD Athalon XP 1800+
DIMM: KVR266X64C25/512
I have been running two KVR266X64C25/512 for about three years on this
server, but when I install two of the same chip W2KAS crashes with a
different STOP message each time, and never in the same stage of
bootup. Sometimes it will make it into the OS and allow me to run an
application, but the moment the application loads the OS crashes to a
reboot.
I tried inserting the /PAE switch in boot.ini, but this has not
corrected the problem.
However, when I remove the two new DIMM's W2KAS boots fine and
operates perfectly. I shut down the server, took out the old DIMM's
and put in the new DIMM's (still only using two chips) and W2KAS boots
fine and operates perfectly. The problem is when I insert all four
chips at once. At first I thought this could have been faulty chips
(all Non-ECC btw) so I bought two more and the problem is the same.
Please help ...