Sysprep issues

  • Thread starter Thread starter Guy
  • Start date Start date
G

Guy

I posted this somewhere else, but i think its better for
in here, I need to use one image for my corp, I've read
about sysprep and mass storage, i kinda understand. Now i
figured i need to use the pnpids tool, and i guess i run
it against the mshdc.inf file is this correct, but i
figured there would be different things, but i compared
the twp ,mshdc.inf from a dell and from a IBM laptop but
there the same so now im confused, please help


Guy
 
Hey, i need some more info, i cant believe there isnt some
thing to walk me through the hole prosses of adding mass
storage devices, the devcon works i seen the mass storage
device, But ok...is there a how to do this paper, i dont
mean the MS one either, its not clear enough, I mean this
is probably not as hard as it seems right now, but i need
some real explanation of how to do it, i really appriciate
it,,thank you
 
Ok...is there some documentation that will walk me through
this sysprep issue, i have tried the sysprep -bmsd switch
and it jsut wants to restart, from what i understand it
should just populate the massstorage section, then i
should run -reseal then -clean, but what do this acutally
do, i cant even get that far, So, if i go to lets say a
gx260 gets its MassStorage device put it in the
sysprep.inf , do i need to load the drivers cause
everything is pointing to mshdc.inf file, which i have
never messed with this that much. Hopefully someone
documented there use of this, and not MS doc either, thank
you.

Guy
 
Hello, again is this how it should look, if so its not
working,

;SetupMgrTag
[Unattended]
OemSkipEula=Yes
OemPnPDriversPath=C:\drivers
InstallFilesPath=C:\sysprep\i386

[GuiUnattended]
AdminPassword=*
OEMSkipRegional=1
TimeZone=35
OemSkipWelcome=1

[UserData]
FullName=Jason
ComputerName=sysprepmstest

[Display]
BitsPerPel=24
Xresolution=1024
YResolution=768
Vrefresh=60

[SetupMgr]
DistFolder=C:\sysprep\i386
DistShare=win2000dist

[Identification]
JoinDomain=ncmc

[Networking]
InstallDefaultComponents=Yes

[sysprep]
buildmassstoragesection=yes


[sysprepmassstorage]


[commands]
"c:\winnt\sysprep\sysprep.exe -clean

Can some one point me in the right direction
 
Back
Top