Syntax for "sysopt noproxyarp"

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I am currently running 2K Advanced Server w/ SP 4. I am running into Event
ID 8021. Article ID : 888816 states what the resolution is to my problem,
but when I enter in the command (sysopt noproxyarp IPaddress) to resolve the
issue, it states that the command is not recognized as an internal or
external command. I've tried running the command on my PIX firewall and the
command works, but
doesn't solve the problem. It has a little bit different syntax when using
CIsco IOS. Where am I supposed to enter this command from? Any help would
be really helpful.

Thanks in advance.
 
The *sysopt noproxyarp* command is used to disable Proxy ARPs on an
interface from the command-line interface. By default, the PIX Firewall
responds to ARP requests directed at the PIX Firewall's interface IP
addresses as well as to ARP requests for any static or global address
defined on the PIX Firewall interface (which are proxy ARP requests).

Read your PIX manual.
 
Back
Top