M
Mecalith
Is there a toggle somewhere on the Word 2007 ribbon to switch between all
field codes and their results.
field codes and their results.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
M
macropod
Hi Mecalith,
The field code display option isn't on the Ribbon - it's found under 'Word Options|Advanced > Show Document Content'
The field code display option isn't on the Ribbon - it's found under 'Word Options|Advanced > Show Document Content'
M
Mecalith
Thank you, macropod.
||
||
macropod said:Hi Mecalith,
The field code display option isn't on the Ribbon - it's found under 'Word Options|Advanced > Show Document Content'
--
Cheers
macropod
[MVP - Microsoft Word]
Mecalith said:Is there a toggle somewhere on the Word 2007 ribbon to switch between all
field codes and their results.
H
Herb Tyson [MVP]
But... if you would LIKE a toggle, you can put the ViewFieldCodes command
onto the Quick Access Toolbar.
Right-click the QAT and choose Customize...
Set Choose commands from... to "All Commands".
Tap the V key to jump to the commands starting with "V", then find View
Field Codes and click on it.
Click the Add key.
Click OK.
You should now see {a} on the QAT. It even looks "pushed in" when you click
it.
PS I always recommend the "Show QAT below the ribbon" option for more
ergonomic placement... a bit easier on the wrist, particularly if you use
the QAT a lot, as some of us do.
Cheers,
--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com
onto the Quick Access Toolbar.
Right-click the QAT and choose Customize...
Set Choose commands from... to "All Commands".
Tap the V key to jump to the commands starting with "V", then find View
Field Codes and click on it.
Click the Add key.
Click OK.
You should now see {a} on the QAT. It even looks "pushed in" when you click
it.
PS I always recommend the "Show QAT below the ribbon" option for more
ergonomic placement... a bit easier on the wrist, particularly if you use
the QAT a lot, as some of us do.
Cheers,
--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com
Mecalith said:Thank you, macropod.
||
macropod said:Hi Mecalith,
The field code display option isn't on the Ribbon - it's found under
'Word Options|Advanced > Show Document Content'
--
Cheers
macropod
[MVP - Microsoft Word]
Mecalith said:Is there a toggle somewhere on the Word 2007 ribbon to switch between
all
field codes and their results.
S
Suzanne S. Barnhill
Not to mention that you get a lot more real estate when it's below the
Ribbon.
--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Ribbon.
--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Herb Tyson said:But... if you would LIKE a toggle, you can put the ViewFieldCodes command
onto the Quick Access Toolbar.
Right-click the QAT and choose Customize...
Set Choose commands from... to "All Commands".
Tap the V key to jump to the commands starting with "V", then find View
Field Codes and click on it.
Click the Add key.
Click OK.
You should now see {a} on the QAT. It even looks "pushed in" when you
click it.
PS I always recommend the "Show QAT below the ribbon" option for more
ergonomic placement... a bit easier on the wrist, particularly if you use
the QAT a lot, as some of us do.
Cheers,
--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com
Mecalith said:Thank you, macropod.
||
macropod said:Hi Mecalith,
The field code display option isn't on the Ribbon - it's found under
'Word Options|Advanced > Show Document Content'
--
Cheers
macropod
[MVP - Microsoft Word]
Is there a toggle somewhere on the Word 2007 ribbon to switch between
all
field codes and their results.
M
Mecalith
***Thank you; That is exactly what I want. ***
||
||
Herb Tyson said:But... if you would LIKE a toggle, you can put the ViewFieldCodes command
onto the Quick Access Toolbar.
Right-click the QAT and choose Customize...
Set Choose commands from... to "All Commands".
Tap the V key to jump to the commands starting with "V", then find View
Field Codes and click on it.
Click the Add key.
Click OK.
You should now see {a} on the QAT. It even looks "pushed in" when you click
it.
PS I always recommend the "Show QAT below the ribbon" option for more
ergonomic placement... a bit easier on the wrist, particularly if you use
the QAT a lot, as some of us do.
Cheers,
--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com
Mecalith said:Thank you, macropod.
||
macropod said:Hi Mecalith,
The field code display option isn't on the Ribbon - it's found under
'Word Options|Advanced > Show Document Content'
--
Cheers
macropod
[MVP - Microsoft Word]
Is there a toggle somewhere on the Word 2007 ribbon to switch between
all
field codes and their results.
H
Herb Tyson [MVP]
Glad the store [ultimately] had what you were looking for. ;-)
--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com
--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com
Mecalith said:***Thank you; That is exactly what I want. ***
||
Herb Tyson said:But... if you would LIKE a toggle, you can put the ViewFieldCodes command
onto the Quick Access Toolbar.
Right-click the QAT and choose Customize...
Set Choose commands from... to "All Commands".
Tap the V key to jump to the commands starting with "V", then find View
Field Codes and click on it.
Click the Add key.
Click OK.
You should now see {a} on the QAT. It even looks "pushed in" when you
click
it.
PS I always recommend the "Show QAT below the ribbon" option for more
ergonomic placement... a bit easier on the wrist, particularly if you use
the QAT a lot, as some of us do.
Cheers,
--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com
Mecalith said:Thank you, macropod.
||
:
Hi Mecalith,
The field code display option isn't on the Ribbon - it's found under
'Word Options|Advanced > Show Document Content'
--
Cheers
macropod
[MVP - Microsoft Word]
Is there a toggle somewhere on the Word 2007 ribbon to switch
between
all
field codes and their results.