Strange NAT Problem

  • Thread starter Thread starter James White
  • Start date Start date
J

James White

Okay here is my situation. I have three computers networked together. Only
one has a public IP. I set up the public server as a router (using NAT) and
it worked fine. The other two computers connected to the internet just fine.
After say, 15 to 30 minutes, internet connection stops until I change to a
different public IP. After troubleshooting for some time I narrowed the
source of the problem. When the internet goes out, the public network
adaptor shows no gateway configured (when I click "details" in status
window). The moment I tell RAS to stop the gateway comes back and I can
browse the internet with the public computer.

This sounds like a configuration issue. Anybody know what could be the
problem?

Thanks.
 
Hi James,

It would be helpful to investigate this issue if you can share out the RAS
logs.

Enable logs:
netsh ras set tracing * enabled

Disable logs:
netsh ras set tracing * disabled

Logs dir:
%windir%\tracing
 
Okay, I will do that. It is offline now, but I will start a new post once I
get that information.
 
Back
Top