stop errors PLEASE HELP ASAP!!!

  • Thread starter Thread starter Chris
  • Start date Start date
C

Chris

I tried to upgrade our ewmail server by swapping our
current hard drive into a new case with a new motherboard
and cpu. THE DRIVE WORKS FINE WITH THE OLD BOARD. We
eanted to install a more reliable and better quality board
and chip than the one we are currently using.

After temp installing the new harddrive, I received the
following message with a blue screen. STOP ERROR:
(0xec41b84c, 0xC0000034, 0x00000000, 0x00000000)
INACCESSABLE_BOOT_DEVICE
 
ALSO, I USED 2 DIFFERENT MOTHERBOARDS AND CPUS AND STILL
HAD THE SAME PROBLEM.
 
Hi,
Look for article number Q271965 in the Micosoft Knowledge
Base. This article describes the error and explains how to
fix it.
Good Luck!
 
Most likely you have the wrong driver loading from the old installation and
it needs to be disabled. Boot into recovery console and disable the old
driver service and enable the proper driver.
 
Back
Top