P
Peter
I keep getting the following Blue Screen Stop Error:
Error code 000000d1, parameter1 00000008, parameter2
00000002, parameter3 00000000, parameter4 f98fafc9
All drivers, service packs/windows, antivirus, anti-spyware
are upto date & it has just started occuring & nothing has
been installed recently. Net searches suggest faulty memory
or drivers? Is there anything anyone can suggest other than
to try & examine the memory dump file & try some new
memory??
Thanks in advance
Peter
P.S. Found this of MS site
Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL
The Stop 0xD1 message indicates that the system attempted
to access pageable memory using a kernel process IRQL that
was too high. Drivers that have used improper addresses
typically cause this error.
Interpreting the Message
This Stop message has four parameters:
1 Memory referenced.
2 IRQL at time of reference.
3 Type of access (0x00000000 = read operation, 0x00000001 =
write operation).
4 Address that referenced memory.
Resolving the Problem
For additional troubleshooting suggestions that apply to
all Stop errors, see "Stop Message Checklist" later in this
appendix.
Stop 0xD1 messages can occur after installing faulty
drivers or system services. If a driver is listed by name,
disable, remove, or roll back that driver to confirm that
this resolves the error. If so, contact the manufacturer
about a possible update. Using updated software is
especially important for backup programs, multimedia
applications, antivirus scanners, DVD playback, and CD
mastering tools.
Error code 000000d1, parameter1 00000008, parameter2
00000002, parameter3 00000000, parameter4 f98fafc9
All drivers, service packs/windows, antivirus, anti-spyware
are upto date & it has just started occuring & nothing has
been installed recently. Net searches suggest faulty memory
or drivers? Is there anything anyone can suggest other than
to try & examine the memory dump file & try some new
memory??
Thanks in advance
Peter
P.S. Found this of MS site
Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL
The Stop 0xD1 message indicates that the system attempted
to access pageable memory using a kernel process IRQL that
was too high. Drivers that have used improper addresses
typically cause this error.
Interpreting the Message
This Stop message has four parameters:
1 Memory referenced.
2 IRQL at time of reference.
3 Type of access (0x00000000 = read operation, 0x00000001 =
write operation).
4 Address that referenced memory.
Resolving the Problem
For additional troubleshooting suggestions that apply to
all Stop errors, see "Stop Message Checklist" later in this
appendix.
Stop 0xD1 messages can occur after installing faulty
drivers or system services. If a driver is listed by name,
disable, remove, or roll back that driver to confirm that
this resolves the error. If so, contact the manufacturer
about a possible update. Using updated software is
especially important for backup programs, multimedia
applications, antivirus scanners, DVD playback, and CD
mastering tools.