P
PaulT
I'm having the strangest problem with a newly built system. I get that
stop error about 10 seconds after logging into a fresh WindowsXP
install. No file is referenced on the bluescreen, only additional
memory addresses (0xC0000005,0x8060AB13,0xB21F79A0,0x00000000)
Hardware:
-Asus A8v Deluxe
-Athlon 3500+
-ATI x800 pro video
-Promise S150 SX4 PCI RAID controller, with 3 new 200gb Maxtor SATA
drives setup as RAID-5 (latest firmware and driver)
-2x512 Corsair TwinXL 3200 sticks.
-Antec trupower 480 PS
Tried the following, with no luck:
-Updated to latest BIOS (including the beta 1.6.006)
-Latest Hyperion drivers are loaded
-4.7 and 4.9 Catalyst drivers tried
-Memtest86 run for 6 hours, no errors
-nothing in event viewer sheds any light
-all startup files stripped from startup folder and registry.
-Changed BIOS settings from "Auto" to manual, and bumped memory
voltage to 2.7v.
-dropped CPU voltage to 1.5v
-Changed BIOS from AGP 8x to 4x
-Temp on Asusprobe is in the low 30's C.
-disabled Cool n Quiet and Qfan
It does boot to safe mode, but it has frozen (not bluescreened) in
safe mode a couple of times.
What gets me is *when* it happens...I can literally count to 10 before
it blows up after logging in. That's gotta be a clue, but I don't know
what it's telling me.
(edit: I left it at the login prompt for about 15 min...then when I
finally logged it, I got the stop error immediately)
I'm about to strip another system for parts to swap out, but I thought
I'd ask here first, since I'm not looking forward to hours of part
swapping and OS reinstalling
TIA for any thoughts
stop error about 10 seconds after logging into a fresh WindowsXP
install. No file is referenced on the bluescreen, only additional
memory addresses (0xC0000005,0x8060AB13,0xB21F79A0,0x00000000)
Hardware:
-Asus A8v Deluxe
-Athlon 3500+
-ATI x800 pro video
-Promise S150 SX4 PCI RAID controller, with 3 new 200gb Maxtor SATA
drives setup as RAID-5 (latest firmware and driver)
-2x512 Corsair TwinXL 3200 sticks.
-Antec trupower 480 PS
Tried the following, with no luck:
-Updated to latest BIOS (including the beta 1.6.006)
-Latest Hyperion drivers are loaded
-4.7 and 4.9 Catalyst drivers tried
-Memtest86 run for 6 hours, no errors
-nothing in event viewer sheds any light
-all startup files stripped from startup folder and registry.
-Changed BIOS settings from "Auto" to manual, and bumped memory
voltage to 2.7v.
-dropped CPU voltage to 1.5v
-Changed BIOS from AGP 8x to 4x
-Temp on Asusprobe is in the low 30's C.
-disabled Cool n Quiet and Qfan
It does boot to safe mode, but it has frozen (not bluescreened) in
safe mode a couple of times.
What gets me is *when* it happens...I can literally count to 10 before
it blows up after logging in. That's gotta be a clue, but I don't know
what it's telling me.
(edit: I left it at the login prompt for about 15 min...then when I
finally logged it, I got the stop error immediately)
I'm about to strip another system for parts to swap out, but I thought
I'd ask here first, since I'm not looking forward to hours of part
swapping and OS reinstalling
TIA for any thoughts