Static IP

  • Thread starter Thread starter pedro.ancient
  • Start date Start date
P

pedro.ancient

I have made a XPE image working, but i need to use static IP. My
network adapter is a Intel Pro/100 M Desktop Adapter.
I have imported the .sld from xpefiles and the hardware is reconized,
but i can't use static ip, any ideia how to resolve it?

Thanks in advance Pedro
 
XPe doesn't have setting for static TCP/IP in Target Deisgner. There is a
solution to the static TCP/IP are xpefiles.com that sets the address during
FBA.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit
 
Where? i can't find it.

XPe doesn't have setting for static TCP/IP in Target Deisgner. There is a
solution to the static TCP/IP are xpefiles.com that sets the address during
FBA.

Regards,

Sean Limingwww.sjjmicro.com/www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit
Click to expand...
 
I have made what is said there, but can't get the static ip
configured. When i do
"netsh interface ip show address" i get "No more data avaiable".

I have no more ideias how to resolve this:S
 
Hmm.. That is a scary message.

Let me ask you this:
- Did it work with DHCP? Was the device assigned with a dhcp ip?
- If not, is the NIC properly installed and configured on your device?
- Does your image include core network components, such as "Core Networking", "TCP/IP Basic Support", "Client for Microsoft
Networks" (not required to get static IP working but often good to have supported), etc.
 
make sure you have

Network Command Shell
Network Command Shell Interface Context
IP Router Monitor Library

and run the following command if you don't have windows explorer
rundll32 netshell.dll HrRenameConnection
 
Back
Top