Stati ip wont stick

  • Thread starter Thread starter Stan Hibbert
  • Start date Start date
S

Stan Hibbert

Hi,

Just restored my forest root 2k server including system state everything
seems OK but I can't seem to get my static ip address etc to stick, after i
put in all my details ip, mask, gateway, dns and click OK then go back in to
the adapter and check its blank as if no details had been input, however if
i do an ipconfig it shows the address any help appreciated.
 
In
Stan Hibbert said:
Hi,

Just restored my forest root 2k server including system state
everything seems OK but I can't seem to get my static ip address etc
to stick, after i put in all my details ip, mask, gateway, dns and
click OK then go back in to the adapter and check its blank as if no
details had been input, however if i do an ipconfig it shows the
address any help appreciated.
Click to expand...

Remove/uninstall the NIC from device manager and let it re-detect. If that
still doesn't fix it, you have shards of stuff in your registry, in
HKLM\System\Current Control Set\Control\Network... and also likely in
controlset001 and 002.

You can remove the NIC in device manager again, and you need to be very
careful in the registry, of course, but you could *gingerly* go in and find
the references to the NIC, and remove them all - then let it redetect the
NIC in device manager.

This may be considered too much of a brute force approach, but it's worked
for me.
 
Back
Top