T
Tony Williams
In w98se you can see what files are run at startup from system information.
Where is the equivalent in w2k?
Tony
Where is the equivalent in w2k?
Tony
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
G
Guest
The easiest way I've found is go to an XP box and copy the msconfig.exe file. It works well on 2000.
Mac
Mac
J
Jim Byrd
Hi Tony - There are several approaches you can use to make controlling the
Startup process easier in Win2k.
1) If you still have access to it, you can move a copy of the Win98 msconfig
to your \System\ folder and it will work - just ignore any complaints it
makes.
2) Much better, you can go here:
http://www.thetechguide.com/downloads.html (XP Version which works in Win2k
just fine) or here:
http://www.3feetunder.com/files/win2K_msconfig_setup.exe (stated to be a
Win2k Version - probably the same as the XP) or here:
http://www.techadvice.com/win2000/m/msconfig_w2k.htm and download msconfig.
3) As good, but different, is to go here:
http://www.mlin.net/StartupCPL.shtml and get Mike Lin's Startup Control
Panel applet. A somewhat more difficult to use but more extensive program
to do the same thing is StartupList from here:
http://www.lurkhere.com/~nicefiles/index.html, or even better, Autoruns from
here: http://www.sysinternals.com/ntw2k/source/misc.shtml#autoruns. Be
very careful about doing any Registry modifications directly unless you're
comfortable with this, and be sure that you BACKUP your Registry before
making any changes, so that you can recover if something goes wrong.
Changes made with StartUpCPL are less likely to cause problems, and are
usually a matter of just re-enabling the particular program. Another
program of this type that I can recommend is StartMan, free. You'll have to
get it here: http://www.pt.lu/comnet/files/utils/startman10396.exe, as the
pcforest site is, sadly, no longer in business. Another such free program
that I can highly recommend is StartupRun, here: http://nirsoft.cjb.net/,
particularly if you suspect malware problems. And finally, StartupCop,
here is excellent and allows you to set up multiple "startup profiles":
http://www.pchelp911.com/files/startcop.zip. If you have problems with
suspected hijackers, you can look up and investigate suspect programs in
your StartUp lists here:
http://www.pacs-portal.co.uk/startup_pages/startup_full.htm (Recommended)
http://www.3feetunder.com/krick/startup/list.html (Recommended)
http://www.answersthatwork.com/Tasklist_pages/tasklist.htm (Recommended)
All work fine for controlling startups, however, I would recommend getting
both of the last two. They're both free, and each has some advantages. For
example, the XP msconfig also gives you some visibility/control over
services, while Mike's applet offers much better startup control.
Also, you should read and print out/save for future reference mskb article
Q179365 here:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q179365 which will
tell you the order in which things get loaded.
Two additional resources which have useful information relating to startup
issues are:
How to Delay Loading of Specific Services
http://support.microsoft.com/default.aspx?scid=kb;en-us;193888
HOWTO: Control Device Driver Load Order
http://support.microsoft.com/support/kb/articles/Q115/4/86.asp
Perhaps this will help.
--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP
In
Startup process easier in Win2k.
1) If you still have access to it, you can move a copy of the Win98 msconfig
to your \System\ folder and it will work - just ignore any complaints it
makes.
2) Much better, you can go here:
http://www.thetechguide.com/downloads.html (XP Version which works in Win2k
just fine) or here:
http://www.3feetunder.com/files/win2K_msconfig_setup.exe (stated to be a
Win2k Version - probably the same as the XP) or here:
http://www.techadvice.com/win2000/m/msconfig_w2k.htm and download msconfig.
3) As good, but different, is to go here:
http://www.mlin.net/StartupCPL.shtml and get Mike Lin's Startup Control
Panel applet. A somewhat more difficult to use but more extensive program
to do the same thing is StartupList from here:
http://www.lurkhere.com/~nicefiles/index.html, or even better, Autoruns from
here: http://www.sysinternals.com/ntw2k/source/misc.shtml#autoruns. Be
very careful about doing any Registry modifications directly unless you're
comfortable with this, and be sure that you BACKUP your Registry before
making any changes, so that you can recover if something goes wrong.
Changes made with StartUpCPL are less likely to cause problems, and are
usually a matter of just re-enabling the particular program. Another
program of this type that I can recommend is StartMan, free. You'll have to
get it here: http://www.pt.lu/comnet/files/utils/startman10396.exe, as the
pcforest site is, sadly, no longer in business. Another such free program
that I can highly recommend is StartupRun, here: http://nirsoft.cjb.net/,
particularly if you suspect malware problems. And finally, StartupCop,
here is excellent and allows you to set up multiple "startup profiles":
http://www.pchelp911.com/files/startcop.zip. If you have problems with
suspected hijackers, you can look up and investigate suspect programs in
your StartUp lists here:
http://www.pacs-portal.co.uk/startup_pages/startup_full.htm (Recommended)
http://www.3feetunder.com/krick/startup/list.html (Recommended)
http://www.answersthatwork.com/Tasklist_pages/tasklist.htm (Recommended)
All work fine for controlling startups, however, I would recommend getting
both of the last two. They're both free, and each has some advantages. For
example, the XP msconfig also gives you some visibility/control over
services, while Mike's applet offers much better startup control.
Also, you should read and print out/save for future reference mskb article
Q179365 here:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q179365 which will
tell you the order in which things get loaded.
Two additional resources which have useful information relating to startup
issues are:
How to Delay Loading of Specific Services
http://support.microsoft.com/default.aspx?scid=kb;en-us;193888
HOWTO: Control Device Driver Load Order
http://support.microsoft.com/support/kb/articles/Q115/4/86.asp
Perhaps this will help.
--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP
In
T
Tony Williams
Thanks guys answered my problems
Tony
Tony
J
John Thomas Smith
In w98se you can see what files are run at startup from system information.
Where is the equivalent in w2k?
Win98 and WinXp have MSCONFIG, but Win2k does not... be VERY
CAREFUL what you disable, or your computer may not run at all
This program does that http://www.mlin.net/StartupCPL.shtml
Also
Stop Flash from taking "forever" to download those huge files
http://www.pcworld.com/downloads/file_description/0,fid,22947,00.asp
Stop Internet Explorer pop-ups http://www.panicware.com
Prescreen and block Email http://www.mailwasher.net
Tweak your system to run better http://www.xteq.com
John Thomas Smith
http://www.direct2usales.com
http://www.pacifier.com/~jtsmith
G
Guest
well off the top of my head i know the services.msc
handles a lot of things starting up but mostly internal
windows files.. if you want to find what starts up regular
program files you should look in the registry.. ie:
start/run/regedit.exe theres a lot of keys that run
programs on startup in there.. just delete the ones you
don't want.. i dont' know all the keys but theres
documentation on the net about it so keep looking..
handles a lot of things starting up but mostly internal
windows files.. if you want to find what starts up regular
program files you should look in the registry.. ie:
start/run/regedit.exe theres a lot of keys that run
programs on startup in there.. just delete the ones you
don't want.. i dont' know all the keys but theres
documentation on the net about it so keep looking..