Starting from scartch, new system

  • Thread starter Thread starter Brian S
  • Start date Start date
B

Brian S

Hi all,
Without going into a long story, a bit of good luck come
my way, and i have now a new Celeron system 2.4mgz, which
was very needed as my older PC was heading for the PC
grave yard.

My problem is that the system whilst it has everything in
it, but it is not loaded up with anything yet, and i
don't know where to start.
It come with a box that had a disc attached to a
Motherboard instruction manual,and a very thin 3 colured
wires [black,white & red ] with small black attachments,
at each end, also there is a wider grey connection with
red only one side with 2 wider flat, black plugs at each
end, plus a nero disc as it is a combo dvd,cd recorder.
I would like to be able to transfer all my files over to
my new hard drive, but i don't know how or were to start.

On my old hard drive i am running now,it has 3 partitions
with one empty partition in it, this is were i get
confused, i should [ hope ] be able to transfer all my
files to the new one, by ghosting it, but the drivers for
the new one, when do they get installed, could i copy all
my files to the empy partition and load whatever drivers
are needed for the new machine, or am i right off track?
Any help would be really appreciated

Thanks
Brian S
 
I am sorry, but i have not got a clue what you mean by
ng's, its probably easy as, but i have never heard of it
before.
I tried that web site that you recommended but
unfortunatly only lead me to a blank page, looks like my
streak of good luck has finished, and i have bitten off
more than i can chew.
never mind thanks anyway,
BE good
BrianS
-----Original Message-----
Sorry, right question but wrong ng's.

Try
http://www.ask.com/

-----Original Message-----
Hi all,
Without going into a long story, a bit of good luck come
my way, and i have now a new Celeron system 2.4mgz, which
was very needed as my older PC was heading for the PC
grave yard.

My problem is that the system whilst it has everything in
it, but it is not loaded up with anything yet, and i
don't know where to start.
It come with a box that had a disc attached to a
Motherboard instruction manual,and a very thin 3 colured
wires [black,white & red ] with small black attachments,
at each end, also there is a wider grey connection with
red only one side with 2 wider flat, black plugs at each
end, plus a nero disc as it is a combo dvd,cd recorder.
I would like to be able to transfer all my files over to
my new hard drive, but i don't know how or were to start.

On my old hard drive i am running now,it has 3 partitions
with one empty partition in it, this is were i get
confused, i should [ hope ] be able to transfer all my
files to the new one, by ghosting it, but the drivers for
the new one, when do they get installed, could i copy all
my files to the empy partition and load whatever drivers
are needed for the new machine, or am i right off track?
Any help would be really appreciated

Thanks
Brian S
.
Click to expand...
.
Click to expand...
 
Back
Top