spoolsv.exe freezes with wireless print server

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Someone please help me. I have an HP 5610v all in one printer and bought a
D-link DPR-1260 to wireless connect to the printer. I have installed it and
everything works fine when I am connected to the print server by network
cable. When I try to go wireless I can print small documents several times or
one large document and eventually the spoolsv.exe in xp will start using all
the system resources and the document will not finish. As I said everything
prints fine when the network cable is attached to my laptop to the print
server and then to the printer but when the network cable is unattached and I
try to go wireless everything goes nuts. I have contacted d-link and they say
their product is working fine and that it is a problem with the print spooler
in xp. Can someone please tell me how to fix this problem so I don't have to
carry my laptop to the printer to print. That is why I bought the print
server.
 
Alan, I fixed the problem last night. It was a problem in the firmware from
D-link and a conflict with IE 7. The firmware upgrade resolved the problem.
Thanks

Alan Morris said:
What type of printer port are you using? I'd disable any Bidirectional
communication on the port and see if you get better throughput.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

byrumbb said:
Someone please help me. I have an HP 5610v all in one printer and bought a
D-link DPR-1260 to wireless connect to the printer. I have installed it
and
everything works fine when I am connected to the print server by network
cable. When I try to go wireless I can print small documents several times
or
one large document and eventually the spoolsv.exe in xp will start using
all
the system resources and the document will not finish. As I said
everything
prints fine when the network cable is attached to my laptop to the print
server and then to the printer but when the network cable is unattached
and I
try to go wireless everything goes nuts. I have contacted d-link and they
say
their product is working fine and that it is a problem with the print
spooler
in xp. Can someone please tell me how to fix this problem so I don't have
to
carry my laptop to the printer to print. That is why I bought the print
server.
Click to expand...
Click to expand...
 
Back
Top