Specify NIC cards for DHCP Server

  • Thread starter Thread starter dgoard
  • Start date Start date
D

dgoard

Hi,
I have a 2000 server with DHCP server and VPN server on the same box.
It has two NICs with addresses of 192.168.1.248 and 192.168.2.1, mask
of 255.255.252.0

Some of my DHCP clients have gotten IP addresses from this server using
and are having problems hitting some websites.
I have traced this far enough to know its not a DNS issue

All that are having the problem have the DHCP server address of .248.

The folks that have 2.1 as there DHCP server address arent having any
problems.

The question is, is there a way to specify DHCP to only use 2.1 for
DHCP services.

I know this config is a little screwy but can anyone help me out here?

Thanks,
DG
 
The DHCP isn't likely your problem,...unless you created Superscopes. The
problem is most likely your network's physical topology design.

Until I clearly know what that topology design is I cannot comment further.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
 
Back
Top