some hosts not available in client network

  • Thread starter Thread starter Anton Sommer
  • Start date Start date
A

Anton Sommer

Hello folks,



I have a win 2k Server SP4 machine, two NICs. One is connected to a DSL
modem the other to the client network. I did redo the RRAS and since then I
face a new problem. Well of course NAT is set and the static route as well.
( It has worked properly before. for years...)
My Problem:
The Clients can not access all hosts in the internet. e.g. the site
www.t-online.de can be accessed 100% from all client machines (in IE) but
the clients cannot access e.g. www.microsoft.com however this site is
available on the server machine but not on clients. Interestingly the
browser is not showing error messages it is only showing a white screen (but
my DNS works fine). Even more interesting is that all sites that are not
accessible on the clients network are those hosts that have ICMP traffic
blocked (means they are not pingable). Are accessible on the server but on
the clients.

I do not know whether this is a routing problem or a general TCP/IP
problem... But in routing there are no filters specified at all.


Any ideas welcome


Thanks


Anton
 
Check the bindingorder (Network Connections, Advanced, Advanced) and make
sure the internal nic is on top.
DNS on both nics *only* point to your server-IP, right?
Apply the regedits in 292822. This is because you have 2 nics and are using
RRAS.
 
Thank you Marina for responding
Check the bindingorder (Network Connections, Advanced, Advanced) and make
sure the internal nic is on top. was on top
DNS on both nics *only* point to your server-IP, right? yes
Apply the regedits in 292822. This is because you have 2 nics and are using
RRAS.
Click to expand...
Have applied it but problem is still there.


Any other ideas or recommendations


Thank you

Anton
 
Can you post the ipconfig/all please? The one from the server and one from a
client.
 
Back
Top