Solid State Hard Drive compatibility

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello All,

I have a 16 GB Solid State Hard Drive and for some reason after a couple of
weeks when I reboot it goes to a blinking cursor in the top left corner or
sometimes it will give an error like NTLDR missing or corrupt. Here is the
scoop on the config and what I have done up to this point.

16 GB Solid State Hard Drive IDE connector
Windows XP SP2 all up to date
Used FDisk
Used Format Utility
Used a couple different Windows Disks
Used a couple different 16 and 8 GB Solid State Flash Drives
Used a couple of different mother boards

All the above leads to the same failures, It may take a little longer in
some cases but at this point the verdict is the same. Thank you for your
assistance,

blacksheep_796
 
Hello blacksheep_796,

I wonder how it relates to .NET?

---
WBR,
Michael Nemtsev [.NET/C# MVP] :: blog: http://spaces.live.com/laflour

"The greatest danger for most of us is not that our aim is too high and we
miss it, but that it is too low and we reach it" (c) Michelangelo


b> 16 GB Solid State
b>
 
This is a Visual Studio .NET programming group. You are unlikely to get
answers to hardware questions here.

Dick

--
Richard Grier, MVP
Hard & Software
Author of Visual Basic Programmer's Guide to Serial Communications, Fourth
Edition,
ISBN 1-890422-28-2 (391 pages, includes CD-ROM). July 2004, Revised March
2006.
See www.hardandsoftware.net for details and contact information.
 
blacksheep_796 said:
I am not sure where you are going with this?
Click to expand...

I think his point was that this is a newsgroup for discussing software
development using Microsoft's .NET Platform, and your question appeared to
relate to a PC not booting - so you are basically asking in the wrong place.
 
Back
Top