Slow connection with Terminal Services

  • Thread starter Thread starter Malcolm Talbot
  • Start date Start date
M

Malcolm Talbot

We recently had to change one of our PC terminals
(Win98SE) connected to a Win2000 server using TS5 (Build
No.2195). The old PC running at 300mhz worked fine but
the new PC(Win98SE) running at 2000mhz is incredibly slow
and you can see the boxes on screen being drawn and filled
in slowly with figures. When accessing the network via
Neighborhood Network there are no delays. The settings on
the old PC were saved and imported into the new PC. The
network card in the new PC is an onboard VIA Rhine II Fast
Ethernet Adapter. I have also tried disabling this card
and installing the DLink 530TX card from the old PC with
no improvement. The settings on the new PC appear to be
the same as the other 4 PC's on the network. Any ideas??
 
Are you using the latest RDP Client, version 5.2.3790? If not I'd recommend that you update that first. You can download the latest Remote Desktop Clients here:

http://www.workthin.com/tsdown.htm

Patrick Rouse
Microsoft MVP - Terminal Server
http://www.workthin.com

----- Malcolm Talbot wrote: -----

We recently had to change one of our PC terminals
(Win98SE) connected to a Win2000 server using TS5 (Build
No.2195). The old PC running at 300mhz worked fine but
the new PC(Win98SE) running at 2000mhz is incredibly slow
and you can see the boxes on screen being drawn and filled
in slowly with figures. When accessing the network via
Neighborhood Network there are no delays. The settings on
the old PC were saved and imported into the new PC. The
network card in the new PC is an onboard VIA Rhine II Fast
Ethernet Adapter. I have also tried disabling this card
and installing the DLink 530TX card from the old PC with
no improvement. The settings on the new PC appear to be
the same as the other 4 PC's on the network. Any ideas??
 
Back
Top