simultaneous LAN and DUN connection, how to route Internet?

  • Thread starter Thread starter Paul Dolend
  • Start date Start date
P

Paul Dolend

In order to do customer support, I often do dial-up connections to
customer's systems. Sometimes it is a RAS connection. Sometimes its
a PPP connection via a terminal server. But, the bottom line is, I
only want traffic for the subnet of the dial-up to go to the dial-up
connection. But whenever I do this, what actually happens is,
Internet traffic tries to go through the dial up connection. I figure
there should be a simple route command or something to take care of
this. Any suggestions?
 
Uncheck "Use default gateway on remote network" from the Advanced TCP/IP
settings of the dial-up connection
--------------------
In order to do customer support, I often do dial-up connections to
customer's systems. Sometimes it is a RAS connection. Sometimes its
a PPP connection via a terminal server. But, the bottom line is, I
only want traffic for the subnet of the dial-up to go to the dial-up
connection. But whenever I do this, what actually happens is,
Internet traffic tries to go through the dial up connection. I figure
there should be a simple route command or something to take care of
this. Any suggestions?
Click to expand...

__
Danny Slye
Microsoft Support Professional
MCSE

This posting is provided "AS IS" with no warranties and confers no rights.
Please reply to the newsgroup so that others may benefit. Thanks!
 
If you are using dial up vpn check the connectoid in
properties/networking/tcp/ip/properties/advanced and uncheck use remote
default gateway. --- Steve
 
Back
Top