Silicom DoubleSerial PC Card

  • Thread starter Thread starter ******************
  • Start date Start date
?

******************

Hello,

I bought Silicom S2S DoubleSerial PCMCIA Card. And I have got a
problem. I installed DOS 6.22 and DOS drivers, but card was not working -
even, if IRQ and other parameters are manually specified.

Please look at this initialization communicat (it seems to be correct):

http://www.wlan.webd.pl/xxx/1.jpg

Then, when I would like to test it there is an error:

http://www.wlan.webd.pl/xxx/2.jpg

and:

http://www.wlan.webd.pl/xxx/3.jpg

I checked my IRQ's and other stuff by SiSoft Sandra - here you have
these logs:

====================================================================================================
SiSoftware Sandra - Memory Range
====================================================================================================

000A0000 - 000BFFFF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
000A0000 - 000BFFFF : NVIDIA GeForce Go 7600
000A0000 - 000BFFFF : PCI bus
000D0000 - 000D3FFF : PCI bus
000D4000 - 000D7FFF : PCI bus
000D8000 - 000DBFFF : PCI bus
000DB000 - 000DBFFF : ENE CB-712/714/810 Cardbus Controller
C0000000 - CFFFFFFF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
C0000000 - CFFFFFFF : NVIDIA GeForce Go 7600
C0000000 - FEBFFFFF : PCI bus
D0000000 - D0FFFFFF : NVIDIA GeForce Go 7600
D0000000 - D1FFFFFF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
D1000000 - D1FFFFFF : NVIDIA GeForce Go 7600
D2000000 - D2000FFF : ENE CB-712/714/810 Cardbus Controller
D2100000 - D2100FFF : Intel(R) PRO/Wireless 3945ABG Network Connection
D2100000 - D21FFFFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D0
D2200000 - D2200FFF : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
D2200000 - D22FFFFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D4
D2500000 - D2503FFF : Microsoft UAA Bus Driver for High Definition Audio
D2504000 - D25043FF : Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host
Controller - 27CC
E0000000 - EFFFFFFF : Motherboard resources
F6BFE000 - FABFDFFF : ENE CB-712/714/810 Cardbus Controller
FABFE000 - FABFEFFF : ENE CB-712/714/810 Cardbus Controller
FABFF580 - FABFF5FF : ENE PCI Memory Stick Card Reader Controller
FABFF600 - FABFF6FF : SDA Standard Compliant SD Host Controller
FABFF700 - FABFF7FF : ENE PCI Secure Digital / MMC Card Reader Controller
FABFF800 - FABFFFFF : VIA OHCI Compliant IEEE 1394 Host Controller
FAC00000 - FEBFFFFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D6
FED00000 - FED003FF : High precision event timer
FED14000 - FED17FFF : Motherboard resources
FED18000 - FED18FFF : Motherboard resources
FED19000 - FED19FFF : Motherboard resources
FED1C000 - FED1FFFF : Motherboard resources
FED20000 - FED3FFFF : Motherboard resources
FED40000 - FED44FFF : Infineon Trusted Platform Module
FED40000 - FED44FFF : PCI bus
FED45000 - FED8FFFF : Motherboard resources
FF000000 - FFFFFFFF : Intel(R) 82802 Firmware Hub Device


====================================================================================================
SiSoftware Sandra - I/O Range
====================================================================================================

00000000 - 0000001F : Direct memory access controller
00000000 - 00000CF7 : PCI bus
00000020 - 00000021 : Programmable interrupt controller
00000024 - 00000025 : Programmable interrupt controller
00000028 - 00000029 : Programmable interrupt controller
0000002C - 0000002D : Programmable interrupt controller
0000002E - 0000002F : Motherboard resources
00000030 - 00000031 : Programmable interrupt controller
00000034 - 00000035 : Programmable interrupt controller
00000038 - 00000039 : Programmable interrupt controller
0000003C - 0000003D : Programmable interrupt controller
00000040 - 00000043 : System timer
0000004E - 0000004F : Infineon Trusted Platform Module
00000050 - 00000053 : System timer
00000060 - 00000060 : Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
00000061 - 00000061 : Motherboard resources
00000062 - 00000062 : Microsoft ACPI-Compliant Embedded Controller
00000063 - 00000063 : Motherboard resources
00000064 - 00000064 : Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
00000065 - 00000065 : Motherboard resources
00000066 - 00000066 : Microsoft ACPI-Compliant Embedded Controller
00000067 - 00000067 : Motherboard resources
00000070 - 00000070 : Motherboard resources
00000070 - 00000077 : System CMOS/real time clock
00000080 - 00000080 : Motherboard resources
00000081 - 00000091 : Direct memory access controller
00000092 - 00000092 : Motherboard resources
00000093 - 0000009F : Direct memory access controller
000000A0 - 000000A1 : Programmable interrupt controller
000000A4 - 000000A5 : Programmable interrupt controller
000000A8 - 000000A9 : Programmable interrupt controller
000000AC - 000000AD : Programmable interrupt controller
000000B0 - 000000B1 : Programmable interrupt controller
000000B2 - 000000B3 : Motherboard resources
000000B4 - 000000B5 : Programmable interrupt controller
000000B8 - 000000B9 : Programmable interrupt controller
000000BC - 000000BD : Programmable interrupt controller
000000C0 - 000000DF : Direct memory access controller
000000F0 - 000000F0 : Numeric data processor
00000170 - 00000177 : Secondary IDE Channel
000001F0 - 000001F7 : Primary IDE Channel
00000274 - 00000277 : ISAPNP Read Data Port
00000279 - 00000279 : ISAPNP Read Data Port
00000376 - 00000376 : Secondary IDE Channel
000003B0 - 000003BB : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
000003B0 - 000003BB : NVIDIA GeForce Go 7600
000003C0 - 000003DF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
000003C0 - 000003DF : NVIDIA GeForce Go 7600
000003F6 - 000003F6 : Primary IDE Channel
000004D0 - 000004D1 : Programmable interrupt controller
00000800 - 0000080F : Motherboard resources
00000A79 - 00000A79 : ISAPNP Read Data Port
00000D00 - 0000FFFF : PCI bus
00001000 - 0000107F : Motherboard resources
00001180 - 000011BF : Motherboard resources
00001670 - 0000167F : Infineon Trusted Platform Module
00001800 - 0000181F : Intel(R) 82801G (ICH7 Family) USB Universal Host
Controller - 27C8
00001820 - 0000183F : Intel(R) 82801G (ICH7 Family) USB Universal Host
Controller - 27C9
00001840 - 0000185F : Intel(R) 82801G (ICH7 Family) USB Universal Host
Controller - 27CA
00001860 - 0000187F : Intel(R) 82801G (ICH7 Family) USB Universal Host
Controller - 27CB
000018B0 - 000018BF : Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA
Storage Controller - 27C4
000018C0 - 000018DF : Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
00002000 - 0000207F : NVIDIA GeForce Go 7600
00002000 - 00002FFF : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R)
945GT Express PCI Express Root Port - 27A1
00003000 - 000030FF : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
00003000 - 00003FFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D4
0000F000 - 0000FFFF : Intel(R) 82801G (ICH7 Family) PCI Express Root Port -
27D6
0000F900 - 0000F9FF : ENE CB-712/714/810 Cardbus Controller
0000FA00 - 0000FAFF : ENE CB-712/714/810 Cardbus Controller
0000FD80 - 0000FDFF : VIA OHCI Compliant IEEE 1394 Host Controller
0000FE00 - 0000FE7F : Motherboard resources
0000FE80 - 0000FEFF : Motherboard resources
0000FF00 - 0000FF7F : Motherboard resources
0000FFE0 - 0000FFEF : SCSI/RAID Host Controller


====================================================================================================
SiSoftware Sandra - IRQ Numbers
====================================================================================================

0 : System timer
1 : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
8 : System CMOS/real time clock
9 : Microsoft ACPI-Compliant System
9 : SCSI/RAID Host Controller
10 : Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
12 : Elantech Touchpad
13 : Numeric data processor
14 : Primary IDE Channel
15 : Secondary IDE Channel
16 : ENE CB-712/714/810 Cardbus Controller
16 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
16 : Intel(R) PRO/Wireless 3945ABG Network Connection
16 : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R) 945GT Express PCI
Express Root Port - 27A1
16 : NVIDIA GeForce Go 7600
17 : ENE PCI Memory Stick Card Reader Controller
17 : ENE PCI Secure Digital / MMC Card Reader Controller
17 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
17 : SDA Standard Compliant SD Host Controller
18 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D4
18 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
18 : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
19 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D6
19 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
20 : VIA OHCI Compliant IEEE 1394 Host Controller
22 : Microsoft UAA Bus Driver for High Definition Audio
23 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
23 : Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC


In Windows I can't even install this card - there is immediately blue
screen and computer resets....
Can you please provide me informagtion what should I do? Thanks!
 
I bought Silicom S2S DoubleSerial PCMCIA Card. And I have got a
problem. I installed DOS 6.22 and DOS drivers, but card was not working -
even, if IRQ and other parameters are manually specified.

Please look at this initialization communicat (it seems to be correct):

http://www.wlan.webd.pl/xxx/1.jpg

Then, when I would like to test it there is an error:

http://www.wlan.webd.pl/xxx/2.jpg
Click to expand...

Does the manual tell you that you can test the serial port
without anything attached ? Did you attach something ?

Mostly, serial ports are tested with either a device or a loop
back plug attached.

I Would suggest to connect a loopback plug or, lacking one, some
serial device like a modem or a serial Mouse.
http://www.hardwarebook.info/ will tell you how to built a
loopback plug.
 
Dnia Wed, 09 Jan 2008 23:49:22 GMT, Gerard Bok napisa³(a):
Does the manual tell you that you can test the serial port
without anything attached ? Did you attach something ?
Click to expand...

Yes, I attached many things. And the same result, nothing is working, test
failed.
 
****************** said:
Dnia Wed, 09 Jan 2008 23:49:22 GMT, Gerard Bok napisa³(a):


Yes, I attached many things. And the same result, nothing is working, test
failed.
Click to expand...

Did you recently buy this card? If so I suggest you contact the manufacturer
or the retailer with a view to replacing it.
 
****************** said:
I bought Silicom S2S DoubleSerial PCMCIA Card. And I have
got a problem. I installed DOS 6.22 and DOS drivers, but
card was not working - even, if IRQ and other parameters
are manually specified.
Click to expand...

Greetings,

I took a look at the setup info from the silicom site. It
appears that the s2s is looking for an os driver/interface
with a name like PC Card & Socket Services v 2.01. I did not
recognize this in the memory lists you posted.

fwiw

Be well,

Tim
 
Back
Top