SideBySide Error Event ID 59

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I am working in Visual Studio 2005. I used the Publish feature for my
Windows C# Application. The name of the application is GLReconCover. I
clicked on the Setup.Exe and came up with the following error message.

Application cannot be started. Contact the application vendor.

Here are the details.

PLATFORM VERSION INFO
Windows : 5.1.2600.131072 (Win32NT)
Common Language Runtime : 2.0.50727.42
System.Deployment.dll : 2.0.50727.42 (RTM.050727-4200)
mscorwks.dll : 2.0.50727.42 (RTM.050727-4200)
dfdll.dll : 2.0.50727.42 (RTM.050727-4200)
dfshim.dll : 2.0.50727.42 (RTM.050727-4200)

SOURCES
Deployment url : file:///C:/GlReconInstall/GLReconCover.application
Application url :
file:///C:/GlReconInstall/GLReconCover_2_0_0_5/GLReconCover.exe.manifest

IDENTITIES
Deployment Identity : GLReconCover.application, Version=2.0.0.5,
Culture=en-US, PublicKeyToken=582edc4a7d4bfd2f, processorArchitecture=msil
Application Identity : GLReconCover.exe, Version=2.0.0.5, Culture=en-US,
PublicKeyToken=582edc4a7d4bfd2f, processorArchitecture=msil, type=win32

APPLICATION SUMMARY
* Installable application.

ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later
in the log.
* Activation of C:\GlReconInstall\GLReconCover.application resulted in
exception. Following failure messages were detected:
+ Activation failed due to a Windows Side-by-Side error. System Event Log
may contain some more information about this failure.
+ This application has failed to start because the application
configuration is incorrect. Reinstalling the application may fix this
problem. (Exception from HRESULT: 0x800736B1)

COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.

WARNINGS
There were no warnings during this operation.

OPERATION PROGRESS STATUS
* [8/23/2006 1:12:42 PM] : Activation of
C:\GlReconInstall\GLReconCover.application has started.
* [8/23/2006 1:12:43 PM] : Processing of deployment manifest has
successfully completed.
* [8/23/2006 1:12:43 PM] : Installation of the application has started.
* [8/23/2006 1:12:44 PM] : Processing of application manifest has
successfully completed.
* [8/23/2006 1:12:48 PM] : Request of trust and detection of platform is
complete.
* [8/23/2006 1:12:49 PM] : Downloading of subscription dependencies is
complete.
* [8/23/2006 1:12:49 PM] : Commit of the downloaded application has started.
* [8/23/2006 1:12:50 PM] : Installation of application has successfully
completed.

ERROR DETAILS
Following errors were detected during this operation.
* [8/23/2006 1:12:50 PM] System.Deployment.Application.DeploymentException
(Activation)
- Activation failed due to a Windows Side-by-Side error. System Event Log
may contain some more information about this failure.
- Source: System.Deployment
- Stack trace:
at
System.Deployment.Application.ComponentStore.ActivateApplication(DefinitionAppId appId, Uri activationUri)
at
System.Deployment.Application.SubscriptionStore.ActivateApplication(DefinitionAppId appId, Uri activationUri)
at
System.Deployment.Application.ApplicationActivator.Activate(DefinitionAppId
appId, AssemblyManifest appManifest, Uri activationUri)
at
System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut)
at
System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Runtime.InteropServices.COMException
- This application has failed to start because the application
configuration is incorrect. Reinstalling the application may fix this
problem. (Exception from HRESULT: 0x800736B1)
- Source: System.Deployment
- Stack trace:
at
System.Deployment.Application.NativeMethods.CorLaunchApplication(UInt32
hostType, String applicationFullName, Int32 manifestPathsCount, String[]
manifestPaths, Int32 activationDataCount, String[] activationData,
PROCESS_INFORMATION processInformation)
at
System.Deployment.Application.ComponentStore.ActivateApplication(DefinitionAppId appId, Uri activationUri)

COMPONENT STORE TRANSACTION DETAILS
* Transaction at [8/23/2006 1:12:50 PM]
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: MTGO5WV1.W85.application
+ System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
- Status: Set
- HRESULT: 0x0
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: GLReconCover.exe.manifest
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: GLReconCover.exe.config
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: GLRecon.ico
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: Updater.xml
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: Settings.xml
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: Utilities.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: Utilities.dll
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: Microsoft.Practices.EnterpriseLibrary.Common.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: Microsoft.Practices.EnterpriseLibrary.Common.dll
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: Microsoft.Practices.EnterpriseLibrary.Logging.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: Microsoft.Practices.EnterpriseLibrary.Logging.dll
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: GLReconCover.exe.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: GLReconCover.exe
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: ControlLibrary.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: ControlLibrary.dll
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: CrystalDecisions.CrystalReports.Engine.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: CrystalDecisions.CrystalReports.Engine.dll
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: Microsoft.Practices.ObjectBuilder.dll.genman
+ System.Deployment.Internal.Isolation.StoreOperationStageComponentFile
- Status: Installed
- HRESULT: 0x0
- File: Microsoft.Practices.ObjectBuilder.dll
+ System.Deployment.Internal.Isolation.StoreOperationInstallDeployment
- Status: Installed
- HRESULT: 0x0
- AppId:
file:///C:/GlReconInstall/GLReconCover.application#GLReconCover.application,
Version=2.0.0.5, Culture=en-US, PublicKeyToken=582edc4a7d4bfd2f,
processorArchitecture=msil
+ System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
- Status: Set
- HRESULT: 0x0
+ System.Deployment.Internal.Isolation.StoreTransactionOperationType (27)
- HRESULT: 0x0
 
Hi Dan,

Have you installed this program in the machine before? If so, you could
have a try uninstalling the the program from the machine first and then
reinstalling this program.

I noticed that there's information about CystalReports.Engine.dll file in
the detailed error message. Do you use CrystalReport in your program? If
yes and you don't install VS 2005 on the machine, I recommend you to
install Crystal Reports for .NET Framework 2.0 component
(CRRedist2005_x86.msi) on the computer before you install the program. You
could find the component file at the VS set up directory, such as
"C:\Program Files\Microsoft Visual Studio
8\SDK\v2.0\BootStrapper\Packages\CrystalReports".

Hope this helps.


Sincerely,
Linda Liu
Microsoft Online Community Support

==================================================
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscriptions/managednewsgroups/default.aspx#notif
ications.

Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at
http://msdn.microsoft.com/subscriptions/support/default.aspx.
==================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
 
Linda,

Thanks for your reply!

It looks to me as if the problem was in the *.manifest and *.config file for
the application. Specifically, the encoding "parameter" was different in the
two files.
One was set to Windows-1251, the utf-8. When I set the 1251 in the *.config
file to
utf-8, my problem when away.

You may want to research why this is happening.

Thanks again!

Dan Kormylo
 
Hi Dan,

Thank you for your reply and feedback on how you solved this problem.

It seems that the encoding parameters in the application config file and
application manifest file must be consistent.

I have a try in VS 2005 adding a applicaiton configuration file into a
project, the default encoding format is utf-8. Perhaps you change the
encoding in the config file by chance or create the config file with other
editor.

If you have any other questions in the future, please don't hesitate to
contact us.

Have a nice day!


Sincerely,
Linda Liu
Microsoft Online Community Support
 
Back
Top