Shutting off the Sata request at boot-A7N8X-E Deluxe

  • Thread starter Thread starter Clarity
  • Start date Start date
C

Clarity

Is there a way to shut off the request for the cntrl s request for sata when
it boots? Can't find anything in the bios or manual.
Thanks
 
Clarity said:
Is there a way to shut off the request for the cntrl s request for sata
when it boots? Can't find anything in the bios or manual.
Thanks
Click to expand...

I'm not sure I follow what you wish to do.

If you wish to disable the SATA controller, there is a jumper for doing
so... check the manual.

If you wish to get rid of the message, but still have SATA, you're out of
luck.

Ben
 
Well...I'm just runnin' two ide standard 7200 wd drives and don't need it to
check sata. Guess it's the jumper on the motherboard to disable it. If I
do, that won't affect my ide drives will it?
Thanks
 
The sata jumper is set to enable (Default) or disable - I ran mine disabled
untill I installed serial drives
 
Clarity said:
Well...I'm just runnin' two ide standard 7200 wd drives and don't need it
to check sata. Guess it's the jumper on the motherboard to disable it.
If I do, that won't affect my ide drives will it?
Click to expand...

Not unless they're plugged into the SATA controller with adapters.

Ben
 
Thanks. Set the jumper to disable and now it boots up much faster without
searching for sata drives. I only asked cuz I couldn't find anything that
related to it and didn't wanna screw up my drives. Sometimes it's hard to
tell about stuff like this when there's no clear documentation.
Appreciate it much.
 
Back
Top